Hi, I have FTTP with Zen in UK and im considering ordering multiple IPs for this connection for multiple hosts on the network but before I do im struggling to see how I could have the ER7206 utilise m

Showing same aggregate figures for UP/DOWN and TX/RX rates. The latter should be realtime not summation. This is on an OC200 v1.0 5.0.30 sw

Hi, I currently have 3 x 225-Outdoors linking 3 sites, basically wired is site A, then site B, then site C. Site B is midway between A and C. I'd fully expected A to mesh to B to mesh to C, but the re

After much fiddling, I was finally able to create a dedicated local LAN subnet and route it across an L2TP client-server tunnel using a Policy Route. What's interesting is that even though the device

I would like to understand EXACTLY how the highlighted value below interact to enable Transmission->Bandwidth Control policies. Specifically, is it by exceeding a percentage of EITHER the UL or DL, Bo

Latest ER605 firmware v1.2.0 on both. Omada OC200 Controller running 5.0.30. I have 1 public IP (HQ) and 1 CGNAT IP (Branch). Basically there is no option to forward ports to a public IP at the Branch