Requirement: To gain access over an L2TP client tunnel to an ER-605's LAN, and also to a remote n/w via the ER-605 over an IPsec tunnel. Both tunnels are working well individually. - The IPsec Lan to

Hi there, I was running my local (albeit Home/ office) network using the TL-SG2008P as switch, hooked to my ISP provided modem, this was hooked to the NT of my fibre 1GBit connection. Room and WiFi co

Hi All, I just bought the EAP660 HD and I am planning to use via POE attached to a switch TP-LINK TL-SG1016PE ( Easy Smart 8 POE+ with 30W max per port ). Unfortunately upon connecting the AP to the s

I have setup L2TP/IPSec on an ER605 (v1 hardware, 1.1.1 firmware) connected to a Huawei gateway with UDP Ports 500 & 4500 forwarded to the ER605. With no other changes, (ALG IPSec is on by default) a

I have the following setup OC200 R605 2x EAP225 1x EAP225 outdoor 1x EAP235 Wall. I have 380Mb broadband, everything connected via Gigabit ethernet, 2.4GHz set to 20MHz wide channels and set 1, 5, 9,

Hi All, TP-Link is aware of the vulnerability in Apache Log4j used in Omada Controller (CVE-2021-44228: Apache Log4j2 <=2.14.1 JNDI features used in configuration, log messages, and parameters do not