Home Network Community >
Wi-Fi Routers >
Archer C1200 v2 management interface and Wifi dies after a little while.
Archer C1200 v2 management interface and Wifi dies after a little while.
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.Archer C1200 v2 management interface and Wifi dies after a little while.
Posts: 11
Helpful: 0
Solutions: 0
Stories: 0
Registered: 2017-10-22
2017-10-22 23:49:42
Posts: 11
Helpful: 0
Solutions: 0
Stories: 0
Registered: 2017-10-22
Archer C1200 v2 management interface and Wifi dies after a little while.
2017-10-22 23:49:42
Tags:
I've seen this issue reported by a couple of people already and some say upgrading firmware solves it.
The issue is that after a while the route still works, you can ping the web interface but don't even load loading page. Also the Wifi is visible but doesn't give any network access.
Rebooting the router solves the issue for a little while.
It seems like v2 of the C1200 is the only version that did not get a 2017 update, it is still on 2016-11-30.
Any chance to get a firmware update to fix this issue? it's plaguing my network and it is really annoying.
Solution
The issue is that after a while the route still works, you can ping the web interface but don't even load loading page. Also the Wifi is visible but doesn't give any network access.
Rebooting the router solves the issue for a little while.
It seems like v2 of the C1200 is the only version that did not get a 2017 update, it is still on 2016-11-30.
Any chance to get a firmware update to fix this issue? it's plaguing my network and it is really annoying.
Solution
TP-Admin wrote
Hi All,
Following initial research and investigation, our Engineering Team is confident that they've determined one of the key origins of the issue. From what we have gathered so far, the issue appears to be related to some recent releases of Android OS and Google Apps. This issue stems from these devices' "Cast" feature, which sends MDNS multicast discovery packets in order to keep a live connection with Google products such as Google Home. These packets normally sent in a 20-second interval. However, we have discovered that the devices will sometimes broadcast a large amount of these packets at a very high speed in a short amount of time. This occurs when the device is awakened from the "sleep mode", and could exceed more than 100,000 packets in a short amount of time. The longer your device is in "sleep", the larger this packet burst will be. This issue may eventually cause some of router’s primary features to shut down – including wireless connectivity.
#1
Options
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
Thread Manage
Announcement Manage
160 Reply
Posts: 5
Helpful: 1
Solutions: 0
Stories: 0
Registered: 2017-12-19
Re:Archer C1200 v2 management interface and Wifi dies after a little while.
2018-01-10 15:42:19
Just updated my V3 model. Have not had enough time to see if it helps, but I am now no longer able to load the router's web interface using Chrome (
Version 63.0.3239.132 (Official Build) (64-bit)) on Windows 10, this used to work. Just has a spinning wait dial. Able to get to the web interface using Firefox/IE on Windows 10 and Chrome on Ubuntu though.
0
We appreciate your feedback. Feel free to let us know more. Log in to submit feedback.
0
We appreciate your feedback. Feel free to let us know more. Log in to submit feedback.
#122
Options
- Copy Link
- Report Inappropriate Content
Thread Manage
Announcement Manage
Posts: 12
Helpful: 1
Solutions: 0
Stories: 0
Registered: 2016-08-24
Re:Archer C1200 v2 management interface and Wifi dies after a little while.
2018-01-10 16:43:50
jbwiden wrote
Just updated my V3 model. Have not had enough time to see if it helps, but I am now no longer able to load the router's web interface using Chrome ( Version 63.0.3239.132 (Official Build) (64-bit)) on Windows 10, this used to work. Just has a spinning wait dial. Able to get to the web interface using Firefox/IE on Windows 10 and Chrome on Ubuntu though.
Did you receive "No such file" error? Clear the browser cache will solve this issue.
0
We appreciate your feedback. Feel free to let us know more. Log in to submit feedback.
0
We appreciate your feedback. Feel free to let us know more. Log in to submit feedback.
#123
Options
- Copy Link
- Report Inappropriate Content
Thread Manage
Announcement Manage
Posts: 3
Helpful: 0
Solutions: 0
Stories: 0
Registered: 2018-01-02
Re:Archer C1200 v2 management interface and Wifi dies after a little while.
2018-01-11 00:06:25
So far the V1(CA) beta has been working fine for me.
0
We appreciate your feedback. Feel free to let us know more. Log in to submit feedback.
0
We appreciate your feedback. Feel free to let us know more. Log in to submit feedback.
#124
Options
- Copy Link
- Report Inappropriate Content
Thread Manage
Announcement Manage
Posts: 5
Helpful: 1
Solutions: 0
Stories: 0
Registered: 2017-12-19
Re:Archer C1200 v2 management interface and Wifi dies after a little while.
2018-01-11 15:21:07
hamson001 wrote
Did you receive "No such file" error? Clear the browser cache will solve this issue.
Thanks, that worked.
0
We appreciate your feedback. Feel free to let us know more. Log in to submit feedback.
0
We appreciate your feedback. Feel free to let us know more. Log in to submit feedback.
#125
Options
- Copy Link
- Report Inappropriate Content
Thread Manage
Announcement Manage
Posts: 1
Helpful: 0
Solutions: 0
Stories: 0
Registered: 2018-01-11
Re:Archer C1200 v2 management interface and Wifi dies after a little while.
2018-01-11 21:03:18
My opinion is:"
This is getting ridiculous, why not switch to WEP while we're at it ? How can such a crappy device be sold in the first place ? And it looks like tplink doesn't care at all.
If you have the opportunity to get a refund, as I did, do it and get a better router."
If you have the opportunity to get a refund, as I did, do it and get a better router."
0
We appreciate your feedback. Feel free to let us know more. Log in to submit feedback.
0
We appreciate your feedback. Feel free to let us know more. Log in to submit feedback.
#126
Options
- Copy Link
- Report Inappropriate Content
Thread Manage
Announcement Manage
Posts: 1
Helpful: 0
Solutions: 0
Stories: 0
Registered: 2018-01-12
Re:Archer C1200 v2 management interface and Wifi dies after a little while.
2018-01-12 17:22:20
TP-Admin wrote
Hi All,
Following initial research and investigation, our Engineering Team is confident that they've determined one of the key origins of the issue. From what we have gathered so far, the issue appears to be related to some recent releases of Android OS and Google Apps. This issue stems from these devices' "Cast" feature, which sends MDNS multicast discovery packets in order to keep a live connection with Google products such as Google Home. These packets normally sent in a 20-second interval. However, we have discovered that the devices will sometimes broadcast a large amount of these packets at a very high speed in a short amount of time. This occurs when the device is awakened from the "sleep mode", and could exceed more than 100,000 packets in a short amount of time. The longer your device is in "sleep", the larger this packet burst will be. This issue may eventually cause some of router’s primary features to shut down – including wireless connectivity.
For US customer, we have released firmware to resolve this issue, you can find the firmware at http://www.tp-link.com/us/faq-2050.html
For other region customer, we will release new firmware to resolve this issue asap, and there are beta firmware for this issue now:
Archer C1200 (EU) V1:
http://static.tp-link.com/2018/201801/20180104/ArcherC1200(EU)_V1_180101_Beta.zip
Archer C1200 (EU) V2:
http://static.tp-link.com/2018/201801/20180104/ArcherC1200(EU)_V2_180101_Beta.zip
Archer C1200 (CA) V1:
http://static.tp-link.com/2018/201801/20180104/ArcherC1200(CA)_V1_180102_Beta.zip
Note: Archer C1200 (CA) V3 use the same firmware as Archer C1200(US) V3, you can find the firmware at http://www.tp-link.com/us/faq-2050.html
May i know http://static.tp-link.com/2018/201801/20180104/ArcherC1200(EU)_V1_180101_Beta.zip able to upgrade for malaysia version?
0
We appreciate your feedback. Feel free to let us know more. Log in to submit feedback.
0
We appreciate your feedback. Feel free to let us know more. Log in to submit feedback.
#127
Options
- Copy Link
- Report Inappropriate Content
Thread Manage
Announcement Manage
Posts: 4
Helpful: 0
Solutions: 0
Stories: 0
Registered: 2018-01-07
Re:Archer C1200 v2 management interface and Wifi dies after a little while.
2018-01-13 19:06:55
Yesterday I updated my C1200 ver2 EU new sw 2.0.1 Build 20180108 rel.37342 (EU). It was releases 12.1.2018. It has same problem with webUI login and wifi as original 2.0 version of software. I had to reboot router this morning. Beta version of 2.0.1 was working almost fine for me.
0
We appreciate your feedback. Feel free to let us know more. Log in to submit feedback.
0
We appreciate your feedback. Feel free to let us know more. Log in to submit feedback.
#128
Options
- Copy Link
- Report Inappropriate Content
Thread Manage
Announcement Manage
Posts: 12
Helpful: 1
Solutions: 0
Stories: 0
Registered: 2016-08-24
Re:Archer C1200 v2 management interface and Wifi dies after a little while.
2018-01-13 19:07:51
Last week, I upgrade to the new official firmware released in the TP-LINK website, it works for 3 days but after that the problem occurs again, so I contact the agent again and they provide a new Beta 180105...
Now 5 days past, it seems that it always works well! So are they updating the Firmware again? Seems that a new firmware will come soon. Anyway it seems that my problem is totally sovlved this time. If you have the same problem with me, you may also need a further version of Firmware.
Now 5 days past, it seems that it always works well! So are they updating the Firmware again? Seems that a new firmware will come soon. Anyway it seems that my problem is totally sovlved this time. If you have the same problem with me, you may also need a further version of Firmware.
0
We appreciate your feedback. Feel free to let us know more. Log in to submit feedback.
0
We appreciate your feedback. Feel free to let us know more. Log in to submit feedback.
#129
Options
- Copy Link
- Report Inappropriate Content
Thread Manage
Announcement Manage
Posts: 1
Helpful: 0
Solutions: 0
Stories: 0
Registered: 2018-01-13
Re:Archer C1200 v2 management interface and Wifi dies after a little while.
2018-01-13 22:16:36
hamson001 wrote
Last week, I upgrade to the new official firmware released in the TP-LINK website, it works for 3 days but after that the problem occurs again, so I contact the agent again and they provide a new Beta 180105...
Now 5 days past, it seems that it always works well! So are they updating the Firmware again? Seems that a new firmware will come soon. Anyway it seems that my problem is totally sovlved this time. If you have the same problem with me, you may also need a further version of Firmware.
Would you mind sharing that new beta mate ? :D
0
We appreciate your feedback. Feel free to let us know more. Log in to submit feedback.
0
We appreciate your feedback. Feel free to let us know more. Log in to submit feedback.
#130
Options
- Copy Link
- Report Inappropriate Content
Thread Manage
Announcement Manage
Posts: 3
Helpful: 0
Solutions: 0
Stories: 0
Registered: 2018-01-13
Re:Archer C1200 v2 management interface and Wifi dies after a little while.
2018-01-15 00:14:58
I also had that issue.
The firmware mentioned here has meanwhile appeared as an update suggestion on my router web interface.
I guess it's no longer beta.
I updated and for the past 2 days haven't had to reboot my Archer C1200.
By now it would have already happened.
One extra tip. If after upgrading FW you are unable to access the webinterface then be sure to clear the browser cache.
The firmware mentioned here has meanwhile appeared as an update suggestion on my router web interface.
I guess it's no longer beta.
I updated and for the past 2 days haven't had to reboot my Archer C1200.
By now it would have already happened.
One extra tip. If after upgrading FW you are unable to access the webinterface then be sure to clear the browser cache.
0
We appreciate your feedback. Feel free to let us know more. Log in to submit feedback.
0
We appreciate your feedback. Feel free to let us know more. Log in to submit feedback.
#131
Options
- Copy Link
- Report Inappropriate Content
Thread Manage
Announcement Manage
Posts: 11
Helpful: 0
Solutions: 0
Stories: 0
Registered: 2017-10-22
2017-10-22 23:49:42
Posts: 11
Helpful: 0
Solutions: 0
Stories: 0
Registered: 2017-10-22
Information
Helpful: 0
Views: 20454
Replies: 160
Voters 0
No one has voted for it yet.
Tags
Related Articles
Web Management Interface
195
2
Report Inappropriate Content
Transfer Module
New message