C7 Login after Changing to Bridge Mode

C7 Login after Changing to Bridge Mode
C7 Login after Changing to Bridge Mode
2018-05-01 23:56:52
Model :

Hardware Version :

Firmware Version :

ISP :

I am connecting to the internet via my C7 using it in Bridge mode and the DHCP disabled for accessing my wireless device. But now I can't log in to the router using the 192.168.0.1 in my web browser. I have also tried to log in using the IP for the wireless device I am bridging. But that only allows me to log in to the wifi device and not the C7 router. Can anyone help me? Thanks. Chuck
0
0
#1
Options
2 Replies
Re:C7 Login after Changing to Bridge Mode
2018-05-03 09:30:06
since the DHCP is disabled, we need to set static IP on your computer in order to login to the web UI of C7 now.
If the LAN ip address of C7 is still 192.168.0.1, you may set 192.168.0.11 as the IPV4 address on your PC and 255.255.255.0 as the subnet musk.
Then, try to login. Good luck.
0
0
#2
Options
Re:C7 Login after Changing to Bridge Mode
2018-05-07 22:51:17

flying snow wrote

since the DHCP is disabled, we need to set static IP on your computer in order to login to the web UI of C7 now.
If the LAN ip address of C7 is still 192.168.0.1, you may set 192.168.0.11 as the IPV4 address on your PC and 255.255.255.0 as the subnet musk.
Then, try to login. Good luck.


Sorry Flying Snow if I'm a little computer challenged. But just where will I be changing to static IP on my computer? Chuck
0
0
#3
Options