Archer A7 Speed is incredibly slow
Hi,
Model : Archer ar AC1750
Hardware Version : Archer A7 5.0
Firmware Version : 1.0.7 Build 20181210 rel.54182(553)
ISP : Spectrum
When I initially hook the ethernet cable to router. I get about 460 down and 23up average. I have a 400mb with spectrum.
My wifi is is about 200m.
I changed ports on router and every time I take the initial speed test it is 400+ down and 20+ up. Afer a couple minutes I do it again and it drops to 30+ down and 20+up. I have checked every seeting I could and can not find anythign that would effect this. Have unplugged, rebooted even reset back to factory.
Any help on this issue?
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
I'm really glad you're getting those speeds now. I had been so frustrated by the C8 I was about to pitch it, but my inner cheapskate made me put it through all that torture I mentioned above, and it paid off.
One odd other effect I noticed- my computer ethernet to ethernet speeds got much better. Where before I might have gotten 30 or 40 mbits box to box, most file xfers from computer to computer are moving along at 100 mbits or so. I had never noticed that before (duh!)
Steve
- Copy Link
- Report Inappropriate Content
@StevenRN I'll have to try that - very interesting
- Copy Link
- Report Inappropriate Content
100-200 mbps is what my spectrum connection is after restart. I'm just trying to overcome the issue of it slowing down after a few hours of use. It slows down to about 25-40mbps. I restart the router and it will speed back up. I disabled the ipv6 to no avail. I guess I'll try a complete reset and go from their.. Just didn't want to spend hours dealing with it. It's at the point where I'm restarting a couple of times/daily so it's probably worth it at this point. Frustrating.
- Copy Link
- Report Inappropriate Content
@dmitch. Try disabling NAT boost?
- Copy Link
- Report Inappropriate Content
@StevenRN I followed your steps exactly (along with disabling ipv6) on the a7 and it worked!! Thank you and that is so strange. One question though, I do not see a setting for the NAT Boost, only the AGC under the NAT Forwarding section. Do you know if NAT Boost is on the a7?
@jas00 I also turned off ipv6 and that combo along with what @StevenRN suggested worked.
Thanks folks!
- Copy Link
- Report Inappropriate Content
NAT Boost is at Advanced:System Tools:System Parameters. About 3/4 of the way down is NAT.
- Copy Link
- Report Inappropriate Content
@livewirefilms I'm really happy to hear this worked for you too; it was making me tear my hair out.
This is kind of funny, but I got an inspiration to turn everything off, set it, then turn on the features I wanted again from a really strange experience as a parent.
My new baby son was bawling his brains out one day, and nothing helped. Food, comfort, rocking, singing, diaper change- no effect.
So, I decided to start from scratch. I laid him on a changing table and took everything off him. Lo and behold, in his little onesie outfit, there was a bitty feather from a pillow stuck in the fabric, and the sharp end was poking him in the back. Ow.
He totally rebooted into baby 2.0, and was a happy camper all day.
So, of course, I totally undressed my router and put back only what it needed. ;-) Lo and behold... it's been a happy well-behaved C8 ever since. Glad it worked on your A7!
Funny how you learn in one place then apply in another... ;-)
Steve
- Copy Link
- Report Inappropriate Content
@Madkicker update software .
- Copy Link
- Report Inappropriate Content
@K9s Me to speed problem...please someone find a fix for this. I am also on latest firmware A7 v5.
- Copy Link
- Report Inappropriate Content
i am unable to open my website www.therecipespk.com/ using my internet connection but when i used mobile data it is workong perfectly.
- Copy Link
- Report Inappropriate Content
Information
Helpful: 1
Views: 32695
Replies: 34