No Wi-Fi
Unable to access Wi-Fi. I have another TP-link, model TL-ER841N and it has no problem using the same modem and cable.
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
If your ISP is a cable provider the issue is likely MAC binding. This as well as the solution are explained here. Should this not help please provide more details such as light status of your Archer AC1750 router, lights on the modem and internet address being displayed in the user interface of the AC1750.
- Copy Link
- Report Inappropriate Content
Carl wrote
If your ISP is a cable provider the issue is likely MAC binding. This as well as the solution are explained here. Should this not help please provide more details such as light status of your Archer AC1750 router, lights on the modem and internet address being displayed in the user interface of the AC1750.
The orange light is solid. not quite sure what you mean by the internet address do you mean the IP address I? I followed your directions with no good results.
- Copy Link
- Report Inappropriate Content
Okay light is green now but still no wi-fi
- Copy Link
- Report Inappropriate Content
So the internet address is your Public IP form the ISP. To retireve it log into the Archer A7 using tplinkwifi.net and click on Advanced at the top.
Don't tell us what it is just make sure its not 0.0.0.0 as that mean it is not talking to the ISP, if that is the case then we recomend contacting them to have your modem reprovisioned.
Next look at the front of the router are either of these lights on or blinking?
If the are not on press and hold this button for two seconds and then check again.
If that doesn't work let us know and we will give you more steps to investigate
- Copy Link
- Report Inappropriate Content
The wifi lights are solid green. I've reset the router several times. I don't believe it's a modem problem, as my other TP-link works using the same modem and set up.
- Copy Link
- Report Inappropriate Content
And the ISP is not zero. I'm starting to believe it's a defective router.
- Copy Link
- Report Inappropriate Content
Tether does not recognize the router. It did one time for approximately five minutes . It does recognize my other router.
- Copy Link
- Report Inappropriate Content
There is a possiblity that the product is defective, but it's also possible it is something else. For us to be able to determine this we would need to complete a bit more troubleshooting.
So the good news is the router seems to be online. if the wireless lights and the WAN (looks like Saturn) are on that means at the very least they in the right status. For our further troubleshooting, since you can log into the router please check the following
1. Do you have internet service on a computer directly connected to the router?
2. Long in and click on Advanced > Wireless > Wireless settings
Make sure the Enable Wireless Radio is checked and the the Network Name and Password are what you want to use and click Save.
Click on the 5Ghz selector and repeat the step above.
Finally in the upper right hand corner click on Reboot. Once the rotuer is back up scan the wireless networks in your area and see if you see either of your network. Try to connect and test the connection.
3. Go here to download the latest FW and Follow this FAQ for installing it.
4. Let us know the results.
- Copy Link
- Report Inappropriate Content
Ok, I have Wi-Fi on the 2.4 gb Channel but not the 5G
- Copy Link
- Report Inappropriate Content
Ok good that's a step in the right dirrection. Next question. Did you name the 5GHz the same as the 2.4GHz or is it diffrent. The password can be the same but we do recommend different names.
- Copy Link
- Report Inappropriate Content
Information
Helpful: 0
Views: 3699
Replies: 11
Voters 0
No one has voted for it yet.