WIFI connected devices not showing up as WIFI clients
Hello,
I have my device in Access point mode as I have another router handling the DHCP portion of the network.
I have multiple devices connected to the Wifi network and yet only one device shows connected when I log into the management page.
Shouldn't all the devices show up un the WIFI section? I am trying to verify who is connected to the Wifi portion of my network.
I have verified all the devices are on the correct network with the correct subnet masks. I have also verified on my DHCP server that they are active, but again I want to verify this on the TP-link WIFI section.
Any help would be great.
Thanks
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
Same problem
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
Another one to add to the list, the WA1201 also has the bug. In fact from having read through this entire thread, after finding it while searching for a solution to the problem with the WA1201, it looks like it's endemic to all TP-Link wireless products.
This is a pretty ridiculous situation, I've never before encountered a wireless AP that's unable to tell you what's connected to it.
- Copy Link
- Report Inappropriate Content
Talked to a friend of mine earlier who does this sort of thing for a living, as soon as I described the problem he said "what they're doing is taking the client list from the ARP table instead of the WiFi-connection table". This matches the comments from @Carl about it being ARP-related, but that's not an excuse for why it's happening, it's a description of a serious flaw in the TP-Link firmware which seems to exist throughout their product line.
In other words the response shouldn't be "well it happens because of this", it should be "we've now identified a design flaw in how our software works and are working on a fix". The client list should not be built from the ARP table but from the WiFi-connection table. This then also allows the device to show attempted-but-failed connect attempts, which is essential when you're trying to debug failed-auth problems and similar.
- Copy Link
- Report Inappropriate Content
Someone or even tp link found a solution yet?
- Copy Link
- Report Inappropriate Content
Same issue here
Brand new Archer C6.
Some 20 clients successfully connected to the Archer - all fully working - only 6 showing up in the client list.
- Copy Link
- Report Inappropriate Content
I spent €85 and can't even see the full list of devices in my network. It has been almost TWO YEARS and still no fix for a simple thing like this.
A great reason to stay away from any device from tp-link for the rest of my life.
- Copy Link
- Report Inappropriate Content
Brand New out of the box AC1750 same issue .. no Clients -- everything is connecting and working well but no list ... this sucks
- Copy Link
- Report Inappropriate Content
@IronAddictAZ Return it if you still can. Stay away from this company for wifi routers, they aren't supporting them as well as other vendors.
- Copy Link
- Report Inappropriate Content
Crazy! 3 years and still the same bug. Good that it happened to me now, that I need to buy a lot of devices... At least this helped me to decide which brand I shouldn't buy
- Copy Link
- Report Inappropriate Content
Information
Helpful: 6
Views: 44818
Replies: 135