smart bulbs Archer C4000 settings?

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

smart bulbs Archer C4000 settings?

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
smart bulbs Archer C4000 settings?
smart bulbs Archer C4000 settings?
2019-12-28 02:01:48
Model: Archer C4000  
Hardware Version: V2
Firmware Version:

Trying to get Philip WIZ wifi bulbs and also Yeelight bulbs to work with this wifi, having little luck, anyone have this same hardware can post the particular settings they used to get it to work!?!

  0      
  0      
#1
Options
2 Reply
Re:smart bulbs Archer C4000 settings?
2019-12-31 19:15:53

@Saker 

 

we responded in a previous post where you requested how to find the port settings.  Please let us know if that helped with this issue.

  0  
  0  
#2
Options
Re:smart bulbs Archer C4000 settings?
2019-12-31 19:59:13

@Saker This is the list of information they gave me, I am nowhere near knowledgable enough to just understand this and how to implement these settings...

 

Here is the exact list of ports you need to open for the WiZ lights to work fully:
- 38899 and 38900 for UDP on local network
- 8883 to establish secure connection with our servers over the internet. This is the MQTT port. - TCP
- 123 - to obtain the time over the internet, for example for scheduled events, UDP
- 80 - to the internet, TCP
- 53 - to the internet, TCP and UDP to resolve Domain Name issues
- 443 - TCP to manage https
They should work with these ports
supports WPA2 (not WPA entreprise), must have UDP broadcast enabled for pairing

 

If someone can tell me how to check and set these up...? :)

  0  
  0  
#3
Options