Slow network performance on AX50/AX3000

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
1161718...

Slow network performance on AX50/AX3000

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
204 Reply
Re:Slow network performance on AX50/AX3000
2021-06-29 13:09:23

@PETzz @MWarren90

The QoS and device priority is what trigger the 250-300Mbps issue, disable all (QoS on Standard) and with no device with prioritization. 
I have a 1Gbps with my ISP and I can replicate the issue always, any of those parameter active and the THP goes down to 250-300Mbps. 
 

  1  
  1  
#171
Options
Re:Slow network performance on AX50/AX3000
2021-06-29 13:48:14

@CristMog I know, but people keep saying again and again that it's the app.

 

It is NOT the app. It is the QoS & Device Priority.

  0  
  0  
#172
Options
Re:Slow network performance on AX50/AX3000
2021-06-29 14:15:02
When I dealt with the issue the first action I took was to turn off QoS, which was already off. So if it is QoS that is the issue then you must be implying the act of joining your router to the app forces QoS on even if it shows off. I have the issue resolved now and don't have any intention of digging into it further. It is low on the totem pole of priorities. I think there are enough people here that have resolved this by removing the app its time to accept that may be an issue. I'm not going to deny that QoS can't cause the same behavior because it absolutely can. For myself and apparently many others that is not the issue.
  0  
  0  
#173
Options
Re:Slow network performance on AX50/AX3000
2021-06-29 14:41:42

@PETzz I've literally never touched the QoS or device priority aside from looking at the tab and moving on. I've never changed those setting away from the default which appears to be "Standard" and no devices selected. How would QoS or device priority be the issues if they were never utilized from the factory default? 

  1  
  1  
#174
Options
Re:Slow network performance on AX50/AX3000
2021-07-05 17:38:05

I can confirm it is QOS and not the Tether app itself. I turned off device priority and did a reboot and I'm getting double the wifi speeds I have been struggling with. for months. QOS literally breaks wifi, so irritating.

  0  
  0  
#175
Options
Re:Slow network performance on AX50/AX3000
2021-07-06 00:27:16

I'm having this problem with my ax50, 50% of my isp is all I can get. I've looked for how to turn the QoS off but I can't for the life of me find anywhere to turn it off.

  0  
  0  
#176
Options
Re:Slow network performance on AX50/AX3000
2021-07-13 13:33:31

I've been talking back and forth with tplink support trying to do different troubleshooting steps but no real luck. This is after I've already tried to do the tether app stuff and take it off all together. You can't really turn off QOS but i never messed with it to begin with after factory restores. Turning it on definitely does kill speeds. turning it back off just keeps me about half and lower of the speeds i should be getting.

  0  
  0  
#177
Options
Re:Slow network performance on AX50/AX3000
2021-07-28 09:24:28

Changing the "Internet Port Negotiation Speed Setting" from "Auto Negotiation" to "1000Mbps Full Duplex" did the trick for me, now I get the >700Mbps from previous 100-250Mbps dl speed. It looks like the modem is slowing down the router with lower WAN speeds if it is set to auto negotiation for some reason.

 

For my Archer AX50 v1.0 Firmware 1.0.9, the setting can be found in System Tools -> System Parameters -> scroll to the very bottom to "Internet Port Negotiation Speed Setting". And you need to switch to the Advanced tab of course.

 

Cheers,

Pascal

  1  
  1  
#178
Options
Re:Slow network performance on AX50/AX3000
2021-08-11 10:06:53

@David_vt deleted the app off my phone, reset the router......BAM! Finally getting the internet speed I'm paying for!! After months of frustration, thank you!!

  1  
  1  
#179
Options
Re:Slow network performance on AX50/AX3000
2021-08-21 17:23:27

@Carl did you not read the thread?  It's about the fricking app that kills your router?

My last experiment with tp link. I guess you guys get paid even if the router goes in the dumpster. 

  0  
  0  
#180
Options