Cant see SSID after attaching to modem

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

Cant see SSID after attaching to modem

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Cant see SSID after attaching to modem
Cant see SSID after attaching to modem
2020-02-04 06:50:16
Model: Archer A9  
Hardware Version: V6
Firmware Version: V.60

After attaching router to cable modem i am unable to see ssid from laptop or my phone.

Follow instruction to press and hold wps/wi-fi tried different ways. 10 sec 1 sec. Nothing seems to make the 2.4 or 5ghz displays light up. Nothing. Only have on/off light displaying and old flying saucer display light up. Nothing else lights up. Call cable company and there is no compatibility issues. Used different lan cables. Unplug plug...nothing

Reset button also results are the same

Nothing.

  0      
  0      
#1
Options
2 Reply
Re:Cant see SSID after attaching to modem
2020-02-04 13:04:08
Try a different cable between the modem and the router and power cycle both. Be sure to use a high quality one.
  0  
  0  
#2
Options
Re:Cant see SSID after attaching to modem
2020-02-04 16:53:04

@Shiyonin 

 

I would try logging into the router with a Ethernet cable from your computer to one of the LAN ports. Then go to Advanced > Wireless > Wireless settings. See if the 2.4 or 5 are enabled.

  0  
  0  
#3
Options