Archer C3200 blocks connections on LAN

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

Archer C3200 blocks connections on LAN

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Archer C3200 blocks connections on LAN
Archer C3200 blocks connections on LAN
2020-02-23 15:39:37 - last edited 2020-03-01 02:10:34
Model: Archer C3200  
Hardware Version: V1
Firmware Version:

Hello, i have two Archer C3200 and they both block devices from seeing each other, be them both wireless or wireless to wired. Sometimes the routers randomly decides to allow a connection between two devices, tipically between the Sony TV and other devices (laptop, iPhone, Echo Show 5). But usually it blocks any protocol/packets between devices (even ping) - I've checked using Wireshark. I've been trying to change their configuration, with no success. Note: one router is in my home, the other is in my parents home, so they are not used on the same LAN. 
 

Do you have any idea about what is going on? Thanks. 

  0      
  0      
#1
Options
1 Accepted Solution
Re:Archer C3200 blocks connections on LAN-Solution
2020-02-26 17:20:41 - last edited 2020-03-01 02:10:34

@LeoPinheiro 

 

Log into the router with a web browser. Go to Advanced > System Tools > System Parameters, disable "Enable IP Isolation" for the 2.4GHz, 5Ghz-1, and 5GHz-2, make sure to select "Save" each time.

Recommended Solution
  1  
  1  
#2
Options
1 Reply
Re:Archer C3200 blocks connections on LAN-Solution
2020-02-26 17:20:41 - last edited 2020-03-01 02:10:34

@LeoPinheiro 

 

Log into the router with a web browser. Go to Advanced > System Tools > System Parameters, disable "Enable IP Isolation" for the 2.4GHz, 5Ghz-1, and 5GHz-2, make sure to select "Save" each time.

Recommended Solution
  1  
  1  
#2
Options