AX50 LAN Speed limited to 100 Mbps
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.AX50 LAN Speed limited to 100 Mbps
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Good morning!
My AX50 is limiting LAN speed to 100 Mbps as shown in the image below from windows ethernet status. Connecting the cable directly to modem or using 5Ghz Wifi gives me the correct speed, what do I have to do to remove this limiter?
Yesterday i unninstalled Tether App and reset router and the problem was fixed but today the speed is limited again and I dont have Tether installed.
Thank you,
Julio Novais
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
@Julionf Try this
Taskbar Right > Network > Change Adapter Options (Right Panel) > Right Click Ethernet > Properties > Microsoft LLDP Protocol Driver > Configure > Advanced > Speed and Duplex > Value > 1gps
- Copy Link
- Report Inappropriate Content
I have the same problem,
I believe it is software issue that D- link must solve
Cant get speed faster than 100mbbs
Changed cables - not working
Changed out router ---- Working! (Using old Toto Link router, so the problem is with the AX50 router)
Changed Bitrate- Not working
Got a replacement Ax50 - Not working !
Please help, dont know what to do anymore??????????????????????
- Copy Link
- Report Inappropriate Content
Are you sure that you have gigabit Ethernet port in your PC. And make sure the cables are gigabit Ethernet supported, otherwise it will not work for sure.
- Copy Link
- Report Inappropriate Content
Just to finish my part in this topic, after trying with AX50 and AX20, both had the same problem...I've bought another brand router and it works fine now.
- Copy Link
- Report Inappropriate Content
Hi,
Seems to be the solution, like I mentioned, other router works fine, same cables , same pc....
This is the second AX50 im trying, The replaced the first..same problem.
Its can only be a major software bug
- Copy Link
- Report Inappropriate Content
yep the problem just started for me on my AX50 .... out of the blue disconnected. I had the ISP replace the modem and fater about 2 hours of troubleshooting I sent the tech on his way since I knew the issue wasnt the ISP or the modem. I found swithc to 100Mbps/Full Duplex did the trick to get me back online after sitting on the phone with a TPLink support rep. I feel like we tried all sorts of combination of thigns before he threw in the towel.
I got fed up went to Best Buy and bought a nother brand of router.... boom worked no issue. No firmware crap, no cable replacement, no doing things in a certain order.... it just worked. I was a TPLink fan buuuuuut I have given up. Hello new router....
- Copy Link
- Report Inappropriate Content
I have had an AX50 for a year and few weeks, 2 weeks ago it dropped the Negotiation speed to 100Mbps, so I lost 66% of my speed ( I have 300Mbps), I can't even get 90Mb in speed.com or speedtest.net, this is so sad, support just keep giving advices like "enable QoS", and "don't set it to Standard", check the cables, I can't believe that I wasted my money on this, besides it doesn't have bandwidth control and more cons
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
Information
Helpful: 0
Views: 12687
Replies: 18
Voters 0
No one has voted for it yet.