3+ second ping/lag spikes to router every ~5 sec
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Just got this new router and getting huge 3+ second lag spikes every ~5 seconds or so. The screenshot says it all. Not sure what to do here. Tried setting the wi-fi channels off Auto already.
v
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
Those are spike to the gateway. We would first start by disconnecting all but one device and running the ping test again. This will ensure that no other device is broadcasting enrounious data causing the spikes. If you still see it with just the one device, switch devices to rull at the 1st test device. If that resolves the issue then the ping spikes were caused by something on one of the client device and you will need to troubleshoot that. If that does not resolve the concern we would recommend starting at the Frimware and updating that if it is needed.
- Copy Link
- Report Inappropriate Content
@Carl Thanks for the reply. The issue turned out to be the TP-Link AC1200 USB wireless reciever I have plugged in to my PC. Rebooting or putting the PC to sleep fixes the issue, but it just keeps coming back at random. You'd think TP-Link's hardware would play together nicer.
- Copy Link
- Report Inappropriate Content
Some thoughts:
-) Assuming you're connecting via Wifi, how is the wifi connection established? 802.11ac or something else?
-) Can you try using another wifi channel instead of your current one?
-) Do you have another accessible computer that you could use for testing? If it has wifi, retry your tests to see if the problem occurs there as well. You could also try plugging the USB receiver into that other computer (ensuring to remove/disable any other wireless gear that may be present) and re-running your test.
Hope this helps.
T.
- Copy Link
- Report Inappropriate Content
try this:
netsh wlan set autoconfig enabled=no interface=(wifi interface name)
"You will need to turn it back on if you disconnect or need to be able to find nearby networks again."
- Copy Link
- Report Inappropriate Content
Information
Helpful: 0
Views: 6513
Replies: 4
Voters 0
No one has voted for it yet.