Under Consideration Ethernet (wired) backhaul for OneMesh products
I really would like to see ethernet backhaul functionality for OneMesh products. Without this functionality the advantage of a OneMesh network don't outweigh the loss of backhaul quality, and thus overall network quality for me.
Unfortunately I didn't do my homework well enough, so I bought the Archer C7 router with the RE505X extender under the assumption I could create a OneMesh WiFi network with ethernet backhaul. In hindsight I probably wouldn't have bought these products.
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
We honestly have not seen much information on this, so it would be unfair to give a timeline. The compatibility was actually first tested and delivered through a beta firmware update to the AX55. Two separate firmware updates posted to the forums, brought first EasyMesh Compatability, and then the current beta firmware is testing the wired backhaul for EasyMesh networks. As this is just a testing phase, the feature may change before it is officially released.
As the feature is developed we may be able to learn more about what systems will support the feature and when it is coming out. Since this has been such a popular request, I will try to make an effort to provide an update if I am given one.
- Copy Link
- Report Inappropriate Content
I would be happy to take part in a beta test if there is interest. I have an old house with very thick walls and quite a few rooms. I have installed CAT6 cabling throughout most of it and currently have 6 access points in various places. I also have a garage and shed without cabling so in need of wireless extending but they canno "see" the main ap in the attic. I might make a useful test subject.
- Copy Link
- Report Inappropriate Content
We have only beta firmware available for the Archer C80,C64, and C80 that adds this feature right now. https://community.tp-link.com/us/home/forum/topic/59631 - However this feature has now been added to the official firmware for these devices and no longer requires the firmware.
What type of Archer are you currently using? I will see if I can find any specific information or else I can keep an eye out for a potential beta firmware in the future.
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
Hi, I have an Archer C7 router with a number of RE505X extenders. These are currently just set up as access points using the cat6 cable. I also have a number of older routers, also connected via cable. SSID is set up to be the same on all.
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
It's unfortunate and disheartening such a desirable feature is not available for one of the "top-of-the-line" routers like the AX11000 + RE505X & RE605X
- Copy Link
- Report Inappropriate Content
Hi, +1 here
having wires behind the OneMesh sounds so logical and useful. Waiting for new fw as well. I personally using AX73 + RE200.
Regards Jan
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
Information
Helpful: 89
Views: 43368
Replies: 112
Voters 67
