AX10/AX1500 VR game streaming stuttering
Hi there, I am a representative of the Virtual Desktop community (community of around 20k on Discord with up to 5000 active users a day) and I need to bring an issue to TP Links attention.
We are often asked which routers our users should get and up until now for those on a budget we have recommended TP Link and the best model we have been advising for Oculus Quest 2 compatibility is the Archer AX10 or AX1500 since the specs match the Quest 2's networking hardware perfectly.
Quite a few users with this TP Link router have been complaining about terrible visual stuttering which is making their VR experience unplayable.
In trying to troubleshoot I purchased one of the routers myself and received a Hardware Version 1.0 router, which I have to say for me is performing brilliantly so far.
It has now become apparent that those suffering issues all have the v1.2 revision of the hardware.
We support our users so have of course advised latest firmware updates and correct WiFi settings but for these people (including a fellow admin who purchased an AX1500 yesterday in the US) the issues persist and all of them will likely be returning the hardware if it cannot be fixed.
Because my v1.0 on is working fine I need to come here and find out what is going on and if something can be fixed asap with a firmware update?
I want to continue to recommend TP Link routers to our members (ever increasing due to Quest 2 popularity) but will have to hold back until this issue is resolved.
We have a few people I can ask to assist with testing if required so please can a representative of TP Link contact me if necessary to get the ball rolling.
Thanks, Liam (oursoul)
https://www.vrdesktop.net/
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
@Carl It has now been 1 full month since any of us have heard from you. Radio silence is absolutely not customer service.
Please update us as soon as possible with any information about what you have done with the info we have all painstakingly provided you with.
- Copy Link
- Report Inappropriate Content
@Gmadu1993 Well said.
Been following this thread for 3 weeks, new firmware out as of today. I'm about to try it out. I still have a week or two to return this router.
- Copy Link
- Report Inappropriate Content
@TheOnlyEgg good luck man, which router do you have? I'm on the AX50 and I haven't had any firmware updates.
- Copy Link
- Report Inappropriate Content
@Gmadu1993 Neither do I... No new firmware for AX50. Best solution for everybody is return it asap, they've abandon us, as it seems, this company is not to be trusted.
- Copy Link
- Report Inappropriate Content
No one has abonded you. Concerns like this are very hard to troublshoot and take time. Especially if our R and D teams cannot replicate the issues. We typically will not update a thread unless we have something to provide and we haven't had anything of note to provide other than still being tested. What we recieved just today was that they still have not been able to replicate the issue so they are going to update the thread with a video of what settings they are using to see if it will correct the concerns for the affected users. When that is ready they will either update directly or provide it to me to upload.
- Copy Link
- Report Inappropriate Content
Thank you for taking the time to check in with us.
I think what everyone here is trying to say, is that there has been 2 full pages of comments and I formation provided by the community over the last month, and we had zero acknowledgement of it all. The last we had heard from you, you asked us for info to share with the R&D department.
Since then, the community has gathered video evidence demonstrating the problem showing the latency spikes and lag,(see BeemanDev's post on page 6) pictures of the Virtual Desktop performance overlay capturing the latency spike on the network tab, (see bfair31's post on page 6) detailed computer specs from many setups including both AMD and NVIDIA, and detailed exactly which hardware and firmware models of the routers we are all using.
I want to say that I understand you are only 1 person, and not even R&D yourself. I simply want to explain why people are feeling abandoned. After spending over $150 on your AX50 router here in Thailand, it is frustrating to hear that the R&D team "can't replicate" the issue that has literally almost every person in this thread saying the solution is to return the router and buy with a different company.
If the R&D would like to save more of their time and effort for recreating the issue, I can happily make a video for them showing how to use the AC mode with the correct settings to largely eliminate this problem. Perhaps then they can take 5 or 10 new products off the shelf and follow all the evidence we have laid out to recreate the issue, then find a solution for this problem that only affects TPLINK AX branded routers. It is absolutely a shame to know that even a cheap, Chinese brand as Huawei can make a better router without these problems. People bought an AX router. We want to use the AC router.
In the end, I will again say thank you Carl. While it's obvious I'm sure by my tone that I am disappointed in the service the R&D department and TPLINK has given this problem as a whole, I respect that you have many more obligations and responsibilities than this one thread. This thread is now the #1 thread ranked by Kudos and page 2 of overall threads on the TPLINK forum. I simply hope that your R&D team reaches out of their own initiative on this thread to talk to us, and follow the evidence we've laid out for them. It boggles my mind that the R&D can't be bothered to actually read the thread and instead relies entirely on you to bring them the information. No one here has been contacted by the R&D team to support them in solving this issue, which I know many of us would be happy to do.
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
I do understand and in the same situation I would likely not be as pleasent and the users on this thread have been. (curse of being a customer service agent, we make the worst customers) As I perviously said we typically will only provide a update if one of sigificace is available. We don't like providing the the ole' hurry up and wait messages. If we provide something we want it to be of sigificance. Also as you can see the community is pretty active and its hard to pro-activiely follow up on ever active thread. If updates are wanted, even if its one of those dreaded "No update yet" please tag or even like you did send a DM. While we do not like to provide those because it doesn't help adress the concern I will still respond. If you do tag one of us and we don't respond with in 1 business day send a DM because we likely didn't see the tag or we are on PTO.
I am going to reach out to the team once more for an update on the promised video and also see if one of them can jump on the thread directly to assist with troubleshooting further.
- Copy Link
- Report Inappropriate Content
Thank you for your understanding Carl. I think I can speak for everyone when I say we really look forward to the R & D team joining the thread so that we can speak with them directly!
- Copy Link
- Report Inappropriate Content
Gonna pop in here and say I have an Archer Ax1800 with a Quest 2 and I'm using 80mhz width with AX mode only, 5ghz band only and no other devices connected with all other settings perfect and I get murderous microstutters.
Its not hard to reproduce it. Your team is just too lazy.
This router is going back to the store. I only have one week before I can no longer return it.
- Copy Link
- Report Inappropriate Content
Information
Helpful: 14
Views: 105099
Replies: 164