Home Network Community > Wi-Fi Routers > Brand new Archer c5400x not working.
< Wi-Fi Routers

Brand new Archer c5400x not working.

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

Brand new Archer c5400x not working.

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Brand new Archer c5400x not working.
Brand new Archer c5400x not working.
2021-01-31 17:17:03

I just received yesterday my new Archer c5400x.

 

Unfortunately after 3 hours of troubleshooting it's still doesn't work.

 

I am familiar with router setups for years and never saw that before, wondering if the unit is defective.

 

I get this blinking pattern - white - and then blinking orange, and then it starts the same again.

 

What I have tried:

 

- Reset my modem many times.

- Reset my router.

- Try to get access to the router 192.168.0.1

 

I understand that the router is not communicating with the modem, or vice-versa.

 

The thing that I don't understand is WHY I can't connect to any of the 8 ports with my laptop. It's like if the ports are all deactivated (I can't even see communicating lights on my laptop RJ45 ports).

 

Also I don't see it when I scan WIFI.

 

With my other routers, if I just plug the power and a network cable to any of the ports I can connect to it a manage it, and I can also see it through wifi, but not this ONE!

 

Is it defective, or stuck in the boot sequence?? 

 

thanks for any help, I will wait for your suggestions and if it doesn't work I will return it.

 

  0      
 
  0      
 
#1
Options
10 Reply
Re:Brand new Archer c5400x not working.
2021-01-31 17:40:37
Check to see if you are getting an IP address on the WAN. (IP address of zeros indicates you are not) If not, see https://community.tp-link.com/us/home/forum/topic/150603
  0  
  0  
#2
Options
Re:Brand new Archer c5400x not working.
2021-01-31 17:42:28
how? like I said in my post, I am not able to communicate with the router, on any of the 8 ports.
  0  
  0  
#3
Options
Re:Brand new Archer c5400x not working.
2021-01-31 19:21:27
By reset, I assume you mean a factory reset, if not try that. Be sure you are using the power adapter that came with the router. Try a different Ethernet cable. Otherwise, my thinking is like yours and you got a defective unit.
  0  
  0  
#4
Options
Re:Brand new Archer c5400x not working.
2021-01-31 20:00:15

@ArcherC8 

 

Ok thank you, yes I did the factory reset many times. Next thing I didn't try is to unplug the coax cable from my modem, but even that doesn't make sense if I'm not able to communicate with all other ports on the router.

  0  
  0  
#5
Options
Re:Brand new Archer c5400x not working.
2021-01-31 20:59:55

@tapidlittle 

 

Let is start with the EASY questions first, the color of the Logo, what is it?

 

 

RED or OFF would indicate a problem with the router for sure.

 

Solid White, router problem.

 

Not white, try a PING command to either 192.168.0.1 or 192.168.1.1, what happens?

  0  
  0  
#6
Options
Re:Brand new Archer c5400x not working.
2021-01-31 21:12:17

@IrvSp 

 

It goes white for a second or 2 then pulse orange for a while then goes white again... keeps doing this forever.

 

impossible to ping like I said all the 8 ports doesn't send any data (little lights on the RJ45 connector are always OFF).

 

I can do a video of the light behavior if you want to. 

  0  
  0  
#7
Options
Re:Brand new Archer c5400x not working.
2021-02-01 00:30:53

 

tapidlittle wrote

@IrvSp 

 

It goes white for a second or 2 then pulse orange for a while then goes white again... keeps doing this forever.

@tapidlittle 

 

Sounds like it is in a reboot cycle, powers up, reboots, powers up.

 

If a RESET using the back button doesn't work, it could be a power supply issue? Disconnect the router, take it to another room and see if it boots up? If it does, check the ports including the WAN port and make sure they are clear and not damaged. Continues, contact Support or I guess return it as defective to the point of purchase?

 

 

  0  
  0  
#8
Options
Re:Brand new Archer c5400x not working.
2021-02-01 16:31:31
I have tried all that, nothing works. I will return it and try a new one, I hope next one will work.
  0  
  0  
#9
Options
Re:Brand new Archer c5400x not working.
2022-02-10 09:32:17 - last edited 2022-02-10 09:32:47

@tapidlittle hey man.. your router is fix now?  i have the same problem with your router man  did you tried another adaptor? 

  0  
  0  
#10
Options
Re:Brand new Archer c5400x not working.
2022-02-10 12:49:16

@IrvSp  you right mate same thing happen to my router what i did is i bought new adaptor has 6amps 12v just to make sure if the problem is the router suddenly boom it works my router is back to normal i think the problem is the power supply

  1  
  1  
#11
Options

Information

Helpful: 0

Views: 2023

Replies: 10

Related Articles
Brand new Archer TX50E V2 fails to start
980 1
 2nd brand new router not working right
564 0
 Brand new Archer AX73 has poor connection
873 0
 Brand New Archer C7 Install problems
1213 0
 Brand new AX3000 issues
571 0
 I think I found a bug in my brand new archer ax150 v1.0
2229 0
About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.