Archer C6 has problems to be enabled in the Dynamic DNS NO-IP

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

Archer C6 has problems to be enabled in the Dynamic DNS NO-IP

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Archer C6 has problems to be enabled in the Dynamic DNS NO-IP
Archer C6 has problems to be enabled in the Dynamic DNS NO-IP
2021-02-12 23:25:56 - last edited 2021-02-16 23:07:55
Model: Archer C6  
Hardware Version: V2
Firmware Version: 1.1.7 Build 20201010 rel.49458

I am writing to report that Archer C6 Router is unable to log into Dynamic DNS services from NO-IP. When entering the username, the password and domain name the router remains in the state of "connecting" and finally the message of "not Launching" appears. I request assistance or that the firmware be reviewed to determine the connection failure.

  0      
  0      
#1
Options
1 Accepted Solution
Re:Archer C6 has problems to be enabled in the Dynamic DNS NO-IP-Solution
2021-02-13 09:43:29 - last edited 2021-02-16 23:07:55

@Tony Success!!!! I changed the WAN DNS in my Router Archer C6 and the NO-IP connection is Good!!! Thank you for your Help!!!

Recommended Solution
  2  
  2  
#4
Options
3 Reply
Re:Archer C6 has problems to be enabled in the Dynamic DNS NO-IP
2021-02-12 23:49:26

@GA_Polo 

 

Modify your current WAN DNS Servers to something else like the following (Advanced > Network > Internet > Click Advanced, select "Use the following DNS..."

 

Primary: 8.8.8.8

Secondary: 8.8.4.4

 

Then go back and try enabling no-ip. If that still does not work, does the TP-Link DDNS work?

  0  
  0  
#2
Options
Re:Archer C6 has problems to be enabled in the Dynamic DNS NO-IP
2021-02-13 03:29:15 - last edited 2021-02-13 03:41:50

@Tony 

TP-Link's DDNS does register the domain name, without modifying the DNS WAN parameter yet. The port forwarding in the ISP Router is open. The access port is HTTP. Connection failure to NO-IP DDNS may be related to HTTP service compatibility? because in my router access by https is disabled
  0  
  0  
#3
Options
Re:Archer C6 has problems to be enabled in the Dynamic DNS NO-IP-Solution
2021-02-13 09:43:29 - last edited 2021-02-16 23:07:55

@Tony Success!!!! I changed the WAN DNS in my Router Archer C6 and the NO-IP connection is Good!!! Thank you for your Help!!!

Recommended Solution
  2  
  2  
#4
Options

Information

Helpful: 0

Views: 962

Replies: 3