Hi @BlazeOfGlory99 

Thank you for your feedback. Was there any change of light in the detected clips, as the change of light in the Activity zone will also trigger the motion. 

Also adjust the Sensitivity level accordingly.

If the above does not help,  can you help provide a photo of the activity zone, a video clip showing the issue (you could share via Google Drive or PM), Kasa app version, thanks in advance

Hello @BlazeOfGlory99  sorry for the late update, I created a support email for you with forum ID 504116 so you could share case details through that email. Please check your inbox, thank you.    
 

Hello@rotherdrummer 

1. Try to temporarily turn off sound Detection on Kasa camera
2. Confirm both Kasa APP and kasa device firmware are both up to date
3. Examine if there is any light change in the triggered video,e.g  car light from the car passing in the activity zone, that will be considered as image change and trigger motion 
4. Adjust camera sensitivity settings
5. What are the sensitivity settings and how do I control them?

If still the same, can you share a photo of the activity zone sensitivity settings , and share the camera MAC and a video link  of the triggered clips that not align with your current settings by private message. 

Hello @BlazeOfGlory99 

Thank you for your continued feedback, as I remember this has been optimized on model Kasa C200 V1, if you confirm app and firmware are both up to date, but the same issue occurs, you could reply to support ticket TKID211102793 and see if our engineer has any update with this, I appreciate your understanding.