RE220 v3 settings - no high speed mode enable/disable
I do not have a checkbox to enable/disable High Speed Mode.
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
Not using one mesh. using 220 as extender
i just found an updated manual that does not have the check box.
Here's the issue: I have a bunch of kasa devices that must connect via 2.4. I was just going to leave the feature disabled. Now I don't know what to select.
thanks.
- Copy Link
- Report Inappropriate Content
How did you configure the extender? Via WPS or Tether/Web UI?
If it was via WPS did you repeat the process so that both bands were configured?
If not then I would suggest reseting the product and reconfiguring, I would use the Web or Tether app setup and make sure you extend both bands, this way Highspeed is not enabled.
If that does not work and Highspeed remains enabled you can choose manual and choose the band to the router to be 5GHz this would then mean 2.4GHz can only be used for clients
- Copy Link
- Report Inappropriate Content
thanks for your input. I used webUI to configure. Both radios are enabled. When I get a minute, I'll do a reset and start over.
- Copy Link
- Report Inappropriate Content
Information
Helpful: 0
Views: 754
Replies: 4
Voters 0
No one has voted for it yet.