8-Port Gigabit not finding some IPs

8-Port Gigabit not finding some IPs

8-Port Gigabit not finding some IPs
8-Port Gigabit not finding some IPs
2024-07-11 14:29:31
Model: TL-SG108  
Hardware Version: V6
Firmware Version:

I have a wired-only network.  So connecting my NetGear Cable Modem to this switch and then to my PC works fine.  Connecting any other peripheral seems to not work.  For example my LG TV and my Switch.  Any ideas on why? 

 

 

Internet is coming from the cable modem into slot 1 on the switch.  

 

 

Thanks

  0      
  0      
#1
Options
2 Reply
Re:8-Port Gigabit not finding some IPs
2024-07-11 14:30:40
Actually the model number for this unit is TL-SG608 but seems like everywhere it is referred to as the 108 so I dunno know what that means
  0  
  0  
#2
Options
Re:8-Port Gigabit not finding some IPs
2024-07-12 22:03:19

  @komp66 

 

TL-SG608 is plug and play swicth - that means it's a unmanaged switch and it doesn't need any configuration to work properly.

Plug your PC in another switch port. If PC still works fine then unplug the PC and plug only the TV in the swich.

If TV works fine then probably your NetGear Cable Modem is in bridge mode, which means it gives only one IP address to the first device plugged into the switch.

 

If this was helpful click on the arrow pointing upward to make it blue. If this solves your issue, click the star to make it blue and mark the post as a "Recommended Solution".
  0  
  0  
#3
Options