W2400 solid red light

W2400 solid red light

W2400 solid red light
W2400 solid red light
2024-09-26 21:08:51
Model: Deco W2400  
Hardware Version:
Firmware Version:

Good evening folks!

 

I have a W2400 that was being used as the main Deco that is now showing a solid red light. 

 

I was able to reset all my other units and start over and build a new network and set another unit as the main Deco and get my home network back in action. 

 

However, this particular unit will not reset. No matter what I try it remains solid red after it boots. 

 

Is there anything else I can try to force a reset so that I can put it back to use? 

 

Thanks for any assistance!

  0      
  0      
#1
Options
5 Reply
Re:W2400 solid red light
2024-09-26 21:46:52

  @Mwe-maxxowner 

 

How did you reset it via the deco app? Or by pressing and holding the button on the bottom of your deco for 1 second?

Need help with the Deco app, setup, Ethernet backhaul, network switch or rolling back firmware? https://community.tp-link.com/us/home/forum/topic/699816?page=1
  0  
  0  
#2
Options
Re:W2400 solid red light
2024-09-27 00:29:47
I attempted to reset it with the reset button on the bottom of the device. It won't connect so I can't do anything with the app. My other decos were all reset with the button on the bottom.
  0  
  0  
#3
Options
Re:W2400 solid red light
2024-09-27 00:52:53

  @Mwe-maxxowner 

 

Please refer to the following link for more suggestions:

Main Deco turned red light

 

and if after a factory reset, the LED had no change, please refer to this link:

 

How to use firmware recovery if the Deco become bricked

Need help with the Deco app, setup, Ethernet backhaul, network switch or rolling back firmware? https://community.tp-link.com/us/home/forum/topic/699816?page=1
  1  
  1  
#4
Options
Re:W2400 solid red light
2024-09-27 00:58:05
I will try the HTTP uboot method. Thanks!
  0  
  0  
#5
Options
Re:W2400 solid red light
2024-09-27 01:01:09

  @Mwe-maxxowner 

 

Keep me posted I've never had to do it myself so I'm interested on how everything goes 

Need help with the Deco app, setup, Ethernet backhaul, network switch or rolling back firmware? https://community.tp-link.com/us/home/forum/topic/699816?page=1
  0  
  0  
#6
Options