Unable to Make Changes in App

Unable to Make Changes in App

Unable to Make Changes in App
Unable to Make Changes in App
2025-05-02 23:39:46
Tags: #XE75Pro
Model: Deco XE75 Pro  
Hardware Version: V2
Firmware Version: 1.2.14 build 20241233 Rel. 16551

Regarding Deco XE75 Pro mesh x3.

 

Hello, I've installed this system and it appears to work fine. However, I've noticed that while the android app (ver. 3.9.23) connects to the mesh devies and display all settings, I'm unable to change settings without rebooting.  For example, the app displays all connected devices and current settings, but doesn't display the current network speed and doesn't allow me to change settings or reboot devices via the app.  If I reboot, I get control again for a day or so.  Ideas?

 

Shawn

  1      
  1      
#1
Options
20 Reply
Re:Unable to Make Changes in App
2025-05-03 19:09:06 - last edited 2025-05-03 19:10:59

  @shaywood 

 

I been having isues with this version of the app that they have been looking into for me, Please open a support ticket using the directions below. 

 

https://www.tp-link.com/us/support/faq/3791/

 

Within a few minutes, you will receive an automated response with a TKID number. Please reply to this post with the TKID number. This will allow the engineers to view your logs and see whats going on 

Need help with the Deco app, setup, Ethernet backhaul, network switch or rolling back firmware? Router or AP mode? https://community.tp-link.com/us/home/forum/topic/699816?page=1
  1  
  1  
#2
Options
Re:Unable to Make Changes in App
2025-05-04 01:49:39 - last edited 2025-05-04 01:52:10

Thanks! Here's the number: TKID250505841

 

I'm not confidence the problem is the app now.  When I access the main router via web browser GUI, I'm able to log-in and see the basic information - but when I attempt to change settings - I get a message stating, "Unable to refresh page".  Strange.  Again, if I reboot the main unit or network, I can see and change settings for a day or so.

  1  
  1  
#3
Options
Re:Unable to Make Changes in App
2025-05-04 02:15:22

  @shaywood 

 

I already let the people helping me know about this thread so they should be able to see your logs via the number you gave me. Most of my issues with the app right now see to be all diusplay issues but now if i go into certain screens it reboots my damn router LOL 

Need help with the Deco app, setup, Ethernet backhaul, network switch or rolling back firmware? Router or AP mode? https://community.tp-link.com/us/home/forum/topic/699816?page=1
  2  
  2  
#4
Options
Re:Unable to Make Changes in App
2025-05-05 16:27:34

Talk about poor service.  The tech reply I recieved appears to be for the wrong problem, and they ask that I install the Android app I'm already running.

 

"

Thank you for bringing the issue with the Main Deco LED turning red when open the Deco app to our attention. Our engineering team is actively investigating this problem and working to resolve it as quickly as possible.
 
To mitigate the issue, we recommend the following steps:
 
1. Uninstall the current Deco app from your device.
 
2. Install the specified versions below:
iOS (version 3.9.12):
 
Android (version 3.9.23):
 
We sincerely apologize for the inconvenience caused and appreciate your patience.
 
 

We look forward to hearing back from you. If you have additional information or feedback to provide, please feel free to let us know.
Please expect the email reply within 1 business day.  For urgent assistance please contact our Live Chat/Phone support with your ticket reference number.
https://www.tp-link.com/support/contact-technical-support/#LiveChat-Support

Mark Daryll Tibayan
TP-Link Technical Support"

  0  
  0  
#5
Options
Re:Unable to Make Changes in App
2025-05-06 11:39:47

  @shaywood 

Have you tested the latest Android APP 3.9.42? It seems fine for my Deco.

 

  0  
  0  
#6
Options
Re:Unable to Make Changes in App
2025-05-06 15:07:35

  @Heidi_Alp 

Thank you. I only see 3.9.23 still in the Android store. Will check into it. 

  0  
  0  
#7
Options
Re:Unable to Make Changes in App
2025-05-08 16:10:38

 3.9.42 is now availabe for me in the App store.  I installed it yesterday, so far so good.

  1  
  1  
#8
Options
Re:Unable to Make Changes in App
2025-06-26 00:37:05

  @shaywood in total I was having a few problems like random reboots of the mesh system when using the app, the app not displaying network devices, and not showing network speed. The other day I disabled the option to ignore pings from WAN in Internet Connection - IPv4. Since then everything seems to be working correctly.

  0  
  0  
#9
Options
Re:Unable to Make Changes in App
2025-07-01 03:35:14
Well, at least the network speeds are showing now. But, if I go in the Android app and look around (no changes), the router/mesh restarts! How sad.
  0  
  0  
#10
Options
Re:Unable to Make Changes in App
2025-07-01 03:41:14

  @shaywood 

 

The problems i were having were due to using an out of date firmware and the check you can run for new firmware from the app wasn't telling me there was a new firmware version when there was. 

 

You should check to see if there is new firmware by doing the following

 

1. Log into http://tplinkdeco.net/

 

2. Click on Advance followed by system

 

3. Now click on Firmware Upgrade

 

4. At the bottom click on "Check up Upgrades"

 

If you have the most recent update i would open up a support ticket 

Need help with the Deco app, setup, Ethernet backhaul, network switch or rolling back firmware? Router or AP mode? https://community.tp-link.com/us/home/forum/topic/699816?page=1
  0  
  0  
#11
Options