Acher ax80Heqdaches
So I am at my wits end and I have have multiple conversations with tech support with zero help. I am not an expert but not a novice. I have three archer ax80 routers. One main and two set as access points. The two AP's are set on 2.4 for channel 11 on both and 20mhz channel width. Same as main router. All three routers are hardwired together. On the 2.4ghz I am only getting 20-30 mps. That is it. Any advice or help. I have set the channels different and width. HELP!!!! And if you fix it a beer for you!!!!
Try the following:
Set the main AX80 2.4 GHz band to channel 6.
Set one AP 2.4GHz to channel 1 and the other one to channel 11.
Set the channel width for all three AX80 to 40MHz and test.
Make sure that negotiated ethernet port speed between the main router an the two APs is appropriate:
Use LAN1 and LAN2 ports to connect APs to the main router.
