Hello,

 

I'm currently running the Tp-Link Be63 / Be 11000 with the official 1.1.17 firmare (April 2025 update).

 

I currently have all of my IOT devices (cameras) located on the guest network for security reasons they are isolated from the main network.  They are port forwarded out to the external IP address utilizing uniques ports.

 

When I attempt to connect to the devices from a cellular or external network thu external Ip address.  The system connects perfectly.

 

When I attemp to connect to the devices from a device on the guest network thu external Ip address.  The system connects perfectly.

 

When I attempt to connect to the devices from a device on the main network thu external Ip address.  The system fails.

 

When attempting to connect to the devices from a device on the main network thru a VPN.  The system fails.

 

----------------------------------------------------------------------------------------------------------

 

Things that have been tried.  When moving the iot devices to the iot network.  The system does connect however, those devices have access to all the devices from the main network.  (Not good)

 

VPN (Fails as above)

 

Local address's (Fails)

 

DDNS (Same Results as above)

 

Spoke to Tp Link support (2 months - fails)

 

Device Isolation on iot devices from main network (fails)

 

 

Anyone else figure a workaround or found a test firmware that works ?

 

Or a feature request : To allow nat loopback across networks that are port forwarded.