GE800-BE800 mesh trying to setup DHCP server: "cannot be in the same subnet"
Just bought a new GE800 and BE00. Don't know the hardware version.
I want the GE800 to allocate DHCP address in the 10.0.0.x range. If I turn off my Comcast modem DHCP server my understanding is that the Comcast modem will be accessible as 10.0.0.1.
Right now the GE800 DHCP server gives out address in the 192.168.0.100-253 range, with gateway 192.168.0.1. The LAN address is set to 192.168.0.1 - they are both on the same network.
If I try to set the DHCP server to give out 10.0.0.x addresses I get the error "WAN IP Address and LAN address cannot be in the same subnet". If I change the LAN address to 10.0.0.1 I get the error "The IP address pool and LAN IP address should be in the same subnet". Messages totally conflict.
However both are in the same 192.168.x subnet with no errors.
What am I missing?
