@JevonsParadox 

Two basic ways to do it.

One is to change the static address of the camera. For many cameras, there is software that allows you to change the static address. I have done it for LTS IP cameras I have attached to both an NVR and to a POE switch. Some camera manufactures have free software you install on your computer and you can change the camera settings. As I recall I used Hikvision software. 

Two you can change the router sub net to be the same as the camera's subnet.

In your case from 192.168.0.1 to 192.168.1.1 or something with 192.168.1 prefix (same as the camera)

Once to have it working, best to assign the ip address in the reservations of the router so other devices do not try to use the same IP