Home Network Community > Wi-Fi Routers > wr841n - no timeserver connection
< Wi-Fi Routers

wr841n - no timeserver connection

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

wr841n - no timeserver connection

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
wr841n - no timeserver connection
wr841n - no timeserver connection
2017-01-13 15:29:38
Model :

Hardware Version :

Firmware Version :

ISP :

Even after entering "north-america.pool.ntp.org", still no connection can be made to update time from time server. This is the case even after a firmware upgrade. It just gives an error message after trying to get present time.
  0      
 
  0      
 
#1
Options
5 Reply
Re:wr841n - no timeserver connection
2017-01-14 00:11:45
Did you set the gateway IP in IP settings if using static IP?
༺ 0100 1101 0010 10ཏ1 0010 0110 1010 1110 ༻
  0  
  0  
#2
Options
Re:wr841n - no timeserver connection
2017-01-14 09:15:28
Hi,
No, this is setup only as WDS bridge plus wireless access point. I think the WAN port is fried anyway. So it just has the bssid of the base router and has its own ip of 192.168.1.20. It is connected to one machine by cat5 cable- kind of a subtitute for a wireless card. But everything works fine except for the ntp. ntpdate program works on the machine though:

root@debian:/home/0# ntpdate pool.ntp.org
13 Jan 19:11:19 ntpdate[23390]: step time server 216.229.4.69 offset 2.003932 sec
  0  
  0  
#3
Options
Re:wr841n - no timeserver connection
2017-01-14 19:49:32
You need to set a default gateway if you use a static IP for the router. Without a default gateway the router's NTP daemon cannot find or connect to servers. Wether ntpdate on your Debian Linux box works or not, is irrelevant for the NTP daemon running on the router.
༺ 0100 1101 0010 10ཏ1 0010 0110 1010 1110 ༻
  0  
  0  
#4
Options
Error code: 5028
2017-01-15 00:04:17
Hi R1D2:
Nothing worked when i tried to set default gateway, but Thanks for helping. Apparently, when in wds bridge mode, the time service does not work, probably because of latency more than 500 milliseconds, as per some older threads.
This worked when actual ip addr of 1.north-america.pool.ntp.org (192.155.90.13) is placed in the first time server's box, and is also setup as a static route under advanced routing..so is a good workaround. I have not tried other variations of this yet, but they may work.





For anyone using wds bridge mode, see older post here or do search on "Error code: 5028":
http://forum.tp-link.com/showthread.php?77730-TL-WR841N-WDS-Setup-Like-quot-Client-Bridge-quot-mode-of-Broadcom-Based-Routers&p=149747&viewfull=1#post149747



  1  
  1  
#5
Options
Re:wr841n - no timeserver connection
2017-01-15 03:17:07
Of course it also works with a static route instead of a default route. Not that much difference! :)

But having to use IP addresses for NTP is definitely a bug - I reported this for the EAP models long time ago to TP-Link already. No feedback so far.

The folks providing NTP servers for free are not amused if IP addresses are being used widely. They explicitly demand users to only use domain names, since using IPs break their load-balancing scheme. TP-Link should really fix this before the folks at ntp.org will decide to permanently blacklist devices using IPs instead of domain names.
༺ 0100 1101 0010 10ཏ1 0010 0110 1010 1110 ༻
  1  
  1  
#6
Options

Information

Helpful: 0

Views: 1850

Replies: 5

Related Articles
 Exposed APIs for wr841n?
519 0
 TL-WR841N login
2312 0
 TP-link tl-wr841N dropping wifi connection for my Acer laptop.
3212 0
TP-LINK WR841N issues with custom password
634 0
 TL-WR841N transmit power
1820 0
 WR841N resets to factory settings
984 1
About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.