TL-WR940N and Uverse
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
TL-WR940N and Uverse
Model :
Hardware Version :
Firmware Version :
ISP :
Uverse just diagnosed my lost and weak signals (broadband and TV) to my TL_WR940N. I had it (2 of then actually) configured as routers and they were conflicting with the Uverse router. Since I unplugged them Uverse is no longer longer losing signal, having slow signal or dropping / freezing tvs. I have a large one story and need both to range extend or create a new wireless network as well as function as a switch. I could use some help on best way to configure this or do I have the wrong box. They worked really well for a while and then the erratic behavior began.
Any help would be appreciated
Bigtony
Hardware Version :
Firmware Version :
ISP :
Uverse just diagnosed my lost and weak signals (broadband and TV) to my TL_WR940N. I had it (2 of then actually) configured as routers and they were conflicting with the Uverse router. Since I unplugged them Uverse is no longer longer losing signal, having slow signal or dropping / freezing tvs. I have a large one story and need both to range extend or create a new wireless network as well as function as a switch. I could use some help on best way to configure this or do I have the wrong box. They worked really well for a while and then the erratic behavior began.
Any help would be appreciated
Bigtony