Archer AX1500 clients all prefer 2.4 GHz band while using Smart Connect
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
I purchased and installed the AX1500 a couple of weeks ago. I utilized the simple setup method via the app and it seemed to make sense to enable Smart Connect, which I did. I typically have 8-10 clients connected at once. The issue I've been noticing is that clients rarely, if ever, are utilizing the 5 GHz band. They all just consistently sit on the 2.4 GHz band. This includes clients that are in the same room as the router, less than 15 feet away, with no obstructions.
Any suggestions? Are there any additional band steering settings I should play with? I like the idea of Smart Connect juggling connections between the band providing the fastest speed, but it seems to defeat the purpose if it's always only utilizing the one band.
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
@pqbrown iPhone 8 running latest iOS is the only one that stays on 5ghz. Macbook, ipad have not moved off of 2.4ghz since I turned smart connect back on and they're within 8 ft of the router.
- Copy Link
- Report Inappropriate Content
Right now i do not have a time table for that. I will keep you posted when i learn more. I can suggest two things 1. to disable Smart Connect or two temporarily set up two networks. Assign the 5GHz network the Smart Connect SSID you want to use. From there connect your 5Ghz devices to the router and then setup Smart Connect. Use the same name you used for the 5GHz name and save the settings. Since these devices were already connect the should (and i stress should) stay connected to the 5GHz in Smart Connect mode.
If they don't then i would recommend refer to option 1 until we can optimize the feature.
- Copy Link
- Report Inappropriate Content
@Carl My assumption is no, but would I see any improvement in this feature if I upgraded to the AX3000 instead?
- Copy Link
- Report Inappropriate Content
unlikely, the software component for smart connect on both devices would likely be the same so likely the same complications.
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
@Carl This happen to me too with my newly purchase AX6000 working with New Dell XPS13 with AX wireless protocol. I hope a fix is available soon.
- Copy Link
- Report Inappropriate Content
same issue on TP-Link Archer C7.
I disabled "Smart Connect" which is not as Smart as it should...
Enabled both 2,4 and 5GHz networsk with same SSID doesn't help at all.
Disconnecting and connecting once again does the job...but it isn;t smart :(
Does anyone have a solution?
- Copy Link
- Report Inappropriate Content
Experiencing exactly the same problem! When I turn on Smart Connect, multiple iPhones and a MacBook get connected to the 2.4G network. Weirdly, there is another MacBook consistently pick the 5G. Tried turning on/off and rebooting the router multiple times and still couldn't get things work as desired. Firmware is the latest (1.0.2 Build 20190809 Rel. 28188) but it seems that there has been no update since last August.
Ended up having to disable this feature and manually connect to 5G for those devices to get high-speed network.
- Copy Link
- Report Inappropriate Content
@aoscott Same here, all my devices were hooked to 2.4 GHz, only my TV camp at 5 GHz so far.
Maybe some optimisation can help out here.
- Copy Link
- Report Inappropriate Content
I have exactly the same problem with you guys! I'm using Archer A6 and if Smart Connect is enabled, every devices will connect to an already crowded 2.4GHz. The first reason that I bought the router because of this feature. But, because it isn't really smart, I have to disable it and manually connect each device in my house.
- Copy Link
- Report Inappropriate Content
Information
Helpful: 4
Views: 19657
Replies: 43
Voters 4
