Disable the privacy separator function
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.Disable the privacy separator function
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
My Deco M4R is working fine except I can't get the printer to work. When I try to connect the printer it tells me to "Disable the privacy separator function". With my regular old router the settings were online and I was able to disable the privacy separator, but since the Deco only has an app, I can not find a way to do this.
Anyone has an idea how to do this?
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
I am not quite sure I understand what you mean by privacy seperator. Can you clairfy? Is is the isolation feature for Guest Networks so they can't communicate with the main network?
- Copy Link
- Report Inappropriate Content
@Carl The message is displayed when I'm logged on on my main network not the Guest Networks. I searched on Google, but can not find an answer for the Deco https://www.google.com/search?rlz=1C1CHBF_enUS880&biw=1302&bih=556&sxsrf=ACYBGNTmpH946U2G2RjlhLlKtTFOhI5IAw%3A1577048058411&ei=-tf_XZDOGO-kggetgrPIDQ&q=how+do+i+turn+off+privacy+separator&oq=disable+privacy+separator+brother+printer&gs_l=psy-ab.1.0.0i71l8.0.0..11575...0.2..0.0.0.......0......gws-wiz.AeLZRsDbWbQ
- Copy Link
- Report Inappropriate Content
Is your printer on your Guest Network? If so likely the privacy seperator is that you are isolating the Guest from your main network, making it impossible for the devices to see each other. Another possible issue could be Double Nat. Who is your ISP and what is the device the main deco connects to?
- Copy Link
- Report Inappropriate Content
@Carl Nothing is going thru my guest network. I'm logged in to my primary network and so is the printer, Not sure what Double Net is, but my internet provider is Spectrum. I have their modem and my Deco for a router. As I said before, with my old D-Link router I was able to go online at the IP address provided by the router and disable the privacy separator. Since the Deco uses an app, I can not find a way to disable it. I like the Deco and the coverage is good, but I need my printer and I may just have to return the Deco and get a regular router.
- Copy Link
- Report Inappropriate Content
Double NAT happens when your modem is actually a modem/router or a gateway device and your network traffic gets translated through 2 private LAN networks, one at the Deco and One at the gateway before going out to the internet or public network. Can you provide us the Make and model of the modem so we can confrim if this is an issue or not? Since the guest network isn't being used the issue could potentially be with the Deco's single network routing technology and may have trouble communicating with the Deco's single network design. To rule this out try turning on your Guest network but only for the 2.4 GHz network. Make sure you allow the Guest network to see the main or host network. Then test. If successful the issue will be confrimed that the printer is having issues working with a single network desgin and you can keep this setup to ensure functionality. If it does work you can also contact your printer maker to see if they have a potential fix.
If it doesn't work then we can contact enigeering and see if anything else can be done. At that point we would need to know the what the modem make and model is, what the printer make and model is, what firmware both devices are running.
- Copy Link
- Report Inappropriate Content
@sunshineusa - I have the same problem. Use Brother 2280DW printer on main network (not guest) and have Deco M9 plus. Have the same privacy seperator error. Did you figure out how to connect it?
Thanks,
Brad
- Copy Link
- Report Inappropriate Content
@sunshineusa Hello, I too have the exact same issue.
- Copy Link
- Report Inappropriate Content
I had this same issue with my Brother printer and what I did was to do a Network Reset on the printer itself. After I did the network reset, I set up the wireless network connection again on the printer and everything worked fine. Give that a try.
Cheers.
- Copy Link
- Report Inappropriate Content
Same problem here. Again, brother printer. The only way to print or scan is to completely reset and re -enroll printer on network each time I print or scan. Bummer.
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
Information
Helpful: 12
Views: 27259
Replies: 11
Voters 0
No one has voted for it yet.