Home Network Community > All Threads > TP-Link AC2300 Wireless Router - WAN / Internet Port stopped working
< All Threads

TP-Link AC2300 Wireless Router - WAN / Internet Port stopped working

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

TP-Link AC2300 Wireless Router - WAN / Internet Port stopped working

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
TP-Link AC2300 Wireless Router - WAN / Internet Port stopped working
TP-Link AC2300 Wireless Router - WAN / Internet Port stopped working
2020-09-13 04:47:22
Model: Archer A2300  
Hardware Version:
Firmware Version:

My TP-Link AC2300 Wireless Router's WAN port seems to have stopped working. 

 

I have tested all possibilities. Initially, I thought it was the ISP's modem that was not working but I did all the following troubleshooting steps:

 

  • Checked that TP-Link internet indicator is not lighting up
  • Unplugged and replugged all devices (modem and router)
  • Disconnected and reconnected all cables (modem and router)
  • Changed LAN cables with new ones
  • Reset both devices
  • Connected my laptop directly to the ISP modem via LAN - the internet worked so this means the LAN cable is working and modem is working but not going into the router

 

I tried contacting Tech Support via email and phone but no reply on both.

 

Please let me know how I can resolve this issue.

 

  1      
 
  1      
 
#1
Options
4 Reply
Re:TP-Link AC2300 Wireless Router - WAN / Internet Port stopped working
2020-09-13 12:29:09
I would check the router and LAN cable for a bent pin. Also try a different LAN cable although it worked to the PC it may fail if bent differently. Power down the modem, the router, and the PC, wait 5 minutes, then power up the modem, wait for it to stabilize, then power up the router and wait for it to stabilize, then power up the PC, and test. If that fails. do a factory reset on the router and reenter your settings.
  0  
  0  
#2
Options
Re:TP-Link AC2300 Wireless Router - WAN / Internet Port stopped working
2020-09-13 15:16:49

@ArcherC8 Thanks for the reply. I have replaced the LAN cable with a new one and have also pressed the Reset button to go back to factory setting. Unfortunately, still the same issue. The internet symbol doesn't light up and no signal is coming through.

  0  
  0  
#3
Options
Re:TP-Link AC2300 Wireless Router - WAN / Internet Port stopped working
2020-09-13 15:58:22
Reach out to support as it sounds like to me it may be bricked or broken.
  0  
  0  
#4
Options
Re:TP-Link AC2300 Wireless Router - WAN / Internet Port stopped working
2020-09-14 00:03:48

@ArcherC8 I have been trying to but they aren't responding to both my calls and email. I will keep trying. Thanks.

  0  
  0  
#5
Options

Information

Helpful: 1

Views: 1229

Replies: 4

Related Articles
TP-Link Archer AC2300 speed test oddities
2288 0
TP Link Archer AC2300 Router - Won't stay connected via L2TP with ExpressVPN
2505 0
New AC2300 - questions
982 0
WAN LAG on tp-link router
1737 0
AC2300 Consistently Restarting On Its Own
670 0
Which wireless router supports dual WAN?
452 0
About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.