Home Network Community > All Threads > AX3000 won't route my iMac via wired ethernet port to the internet
< All Threads

AX3000 won't route my iMac via wired ethernet port to the internet

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

AX3000 won't route my iMac via wired ethernet port to the internet

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
AX3000 won't route my iMac via wired ethernet port to the internet
AX3000 won't route my iMac via wired ethernet port to the internet
2021-01-18 18:31:28
Model: Archer AX3000  
Hardware Version: V1
Firmware Version: 1.04 Build 20200426 relationship.69563(5553)

I just bought and installed an AX3000. When I plug my iMac into a 1Gb Ethernet port on the router, it fails to connect.

I suspect it is because the hardware Ethernet port is configured in the iMac to use DNS 10.0.1.1. I have tried to change this in the iMac but it always reverts to 10.0.1.1.

How do I configure the iMac and/or the AX3000 so that I can use the Ethernet ports?

 

Greg14

  0      
 
  0      
 
#1
Options
3 Reply
Re:AX3000 won't route my iMac via wired ethernet port to the internet
2021-01-19 14:36:49

@Greg14 

 

What are your settings in system preferences / network / Ethernet?

 

On my iMac I have 'Using DHCP' and in the advance tab 'DNS' my iMac shows 192.168.0.1 in the list.

  0  
  0  
#2
Options
Re:AX3000 won't route my iMac via wired ethernet port to the internet
2021-01-22 02:37:11

@ArcherC8 It is set to "Using DHCP" with DNS set to 10.0.1.1.  As previously mentioned, I changed the DNS address to 192.168.0.1. However, when I plug in the Ethernet cable, after a few seconds it automagically changes back to 10.0.1.1.

The DHCP server is providing a valid 192.168.0.* address. But with the DNS address flipping back to 10.0.1.1, it can't reach the Internet.

Somehow, the router needs to be configured to behave like an DNS gateway or proxy. 

  0  
  0  
#3
Options
Re:AX3000 won't route my iMac via wired ethernet port to the internet
2021-01-22 22:23:19

@Greg14 

In your router, what do you have for the LAN setting for the IP Address?

  0  
  0  
#4
Options

Information

Helpful: 0

Views: 670

Replies: 3

Related Articles
AX3000 Wireless Devices and Wired Devices won't communicate
829 0
Archer AX3000 won't connect to Leviton 47611 ethernet switch
416 0
AX6000 won't log in via wired connection
1879 0
Archer AX3000 Service / Port Blocking
1612 0
AX3000 wired connections through switch go up and down
522 0
Cannot access web management page via WiFi or ethernet or Tether
1134 0
About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.