Upgraded deco m5 to the October 2020 firmware....issues since with AMCREST cameras

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

Upgraded deco m5 to the October 2020 firmware....issues since with AMCREST cameras

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Upgraded deco m5 to the October 2020 firmware....issues since with AMCREST cameras
Upgraded deco m5 to the October 2020 firmware....issues since with AMCREST cameras
2021-03-05 22:55:42
Model: Deco M5  
Hardware Version: V3
Firmware Version: 1.5.1 Build 20201022 Rel. 66804

After upgrading to 1.5.1 Build 20201022 Rel. 66804, my amcrest cameras would not connect.....I was able to change the encryption fom WPA2-PSK [AES] back to the old encryption of WPA2-PSK [AES] = WP-PSK [TKIP] even though the cameras have connected to a WPA2-PSK [AES]  ATT network prior to the MESH install 4 weeks prior.

 

Now my cameras come on/off via my amcrest app...I have switched the DECO units OPERATING MODE from ROUTER to ACCESS POINT but still having issues.

 

I bought the MESH to help with the cameras......if I cannot fix this I would prefer to role back to a prior release.

 

Help wanted :)

  0      
  0      
#1
Options
1 Reply
Re:Upgraded deco m5 to the October 2020 firmware....issues since with AMCREST cameras
2021-03-08 21:52:24

@gammy999 

 

There is a 1.5.3. firmware release you can try upgrading to see how your cameras perform: https://www.tp-link.com/us/support/download/deco-m5/#Firmware

 

If you wanted to downgrade to the previous version, you would download the file "Deco M5(US)_V3_200924".

 

Here is how you would upgrade/downgrade the firmware (Method 2): https://www.tp-link.com/us/support/faq/1599/

  1  
  1  
#2
Options