Home Network Community > All Threads > Archer C6 not enabling 5G
< All Threads

Archer C6 not enabling 5G

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

Archer C6 not enabling 5G

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Archer C6 not enabling 5G
Archer C6 not enabling 5G
2022-01-29 07:40:14
Model: Archer C6  
Hardware Version: V2
Firmware Version: 1.3.6 Build 20200902 rel.65591

5G section is disabled and 5G SSID is not shown in devices to connect. In the same devices 5G SSID was shown earlier. In Wireless settings 5G is shown but greyed, click does not work. Contacted customer care, but support guy could not fix it. He told me to reset the router. I did that but still same issue. When I connect to LAN directly without router the speed is 150 MBPS wheres if I connect through the router it is just around 50 MBPS 

  0      
 
  0      
 
#1
Options
1 Reply
Re:Archer C6 not enabling 5G
2022-02-22 09:55:26

ajithsowkoor wrote

5G section is disabled and 5G SSID is not shown in devices to connect. In the same devices 5G SSID was shown earlier. In Wireless settings 5G is shown but greyed, click does not work. Contacted customer care, but support guy could not fix it. He told me to reset the router. I did that but still same issue. When I connect to LAN directly without router the speed is 150 MBPS wheres if I connect through the router it is just around 50 MBPS 

 

Hello @ajithsowkoor, if the 5GHz signal cannot be enabled on the router, I guess it could be a firmware or hardware issue, we suggest reaching out to the local tech support to be advised further:

Contact Technical Support

Nice to Meet You in Our TP-Link Community. Check Out the Latest Posts: Connect TP-Link Archer BE550 to Germany's DS-Lite (Dual Stack Lite) Internet via WAN Archer GE550 - BE9300 Tri-Band Wi-Fi 7 Gaming Router EasyMesh Is Available When Wi-Fi Routers Work in AP Mode as A Controller. Archer AX90 New Firmware Added Support for EasyMesh and Ethernet Backhaul If you found a post or response helpful, please click Helpful (arrow pointing upward icon). If you are the author of a topic, remember to mark a helpful reply as the "Recommended Solution" (star icon) so that others can benefit from it.
  0  
  0  
#2
Options

Information

Helpful: 0

Views: 417

Replies: 1

Related Articles
Archer C6 Bug
815 0
Archer C6 v3.20 Satellite Setup Issue
624 0
Archer C6 v2 WAN connection instability
913 0
Archer C6 has problems to be enabled in the Dynamic DNS NO-IP
1378 0
Custom Mac clone error in a new archer c6 update (Archer C6(EU)_V3.20_210513)
908 0
Archer C6 Wi-Fi Performance Issues
403 0
About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.