Archer C6 v3.20 Satellite Setup Issue

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

Archer C6 v3.20 Satellite Setup Issue

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Archer C6 v3.20 Satellite Setup Issue
Archer C6 v3.20 Satellite Setup Issue
2024-04-14 18:03:20 - last edited 2024-04-14 18:54:12
Model: Archer C6  
Hardware Version: V3
Firmware Version:

I've bought an AX3000 recently in the hope that I might be able to mesh it with my existing C6, just so I could keep it as a "backup" but with better coordination on which devices connect to which.

Set up the AX3000, factory reset the C6 and... the AX detected the C6 on LAN, but when I started pairing it as a satellite router, after some thinking, it just threw some unhelpful error. Tried both connecting WAN port to existing LAN and (after disabling DHCP) LAN to LAN. Also tried switching to AP mode, but then I've read that routers in AP mode just won't create a mesh yet.

Could this be because the AX tries to force the wifi6 settings to the C6 as well as the 2.4 and 5 GHz settings? Has anyone met with similar issue?

Thanks in advance!

  0      
  0      
#1
Options
1 Accepted Solution
Re:Archer C6 v3.20 Satellite Setup Issue-Solution
2024-04-14 18:19:29 - last edited 2024-04-14 18:54:12

  @PartyBA 

 

Archer C6 v3.20 can't be used as a satellite device - it doesn't support Easymesh - Archer C6 V4 does. Here's a list of routers that support Easymesh.

If this was helpful click once on the arrow pointing upward. If this solves your issue, click once the star to mark it as a "Recommended Solution".
Recommended Solution
  1  
  1  
#2
Options
3 Reply
Re:Archer C6 v3.20 Satellite Setup Issue-Solution
2024-04-14 18:19:29 - last edited 2024-04-14 18:54:12

  @PartyBA 

 

Archer C6 v3.20 can't be used as a satellite device - it doesn't support Easymesh - Archer C6 V4 does. Here's a list of routers that support Easymesh.

If this was helpful click once on the arrow pointing upward. If this solves your issue, click once the star to mark it as a "Recommended Solution".
Recommended Solution
  1  
  1  
#2
Options
Re:Archer C6 v3.20 Satellite Setup Issue
2024-04-14 18:31:40

  @terziyski  thanks, I thought EasyMesh was just a more universal form of OneMesh, which is supported by it, but if that's not the case, I might as well just sell it.

  0  
  0  
#3
Options
Re:Archer C6 v3.20 Satellite Setup Issue
2024-04-14 18:40:33

  @PartyBA 

 

Archer C6 v3.20 supports Onemesh which allows only certain range extenders or PLCs to be used to extend the main router wireless coverage.

Refer Onemesh FAQ - Q9/A9.

What you can do (if it's possible) is to use your Archer C6 as a wired access point connected to your main router - details.

If this was helpful click once on the arrow pointing upward. If this solves your issue, click once the star to mark it as a "Recommended Solution".
  1  
  1  
#4
Options

Information

Helpful: 0

Views: 613

Replies: 3

Related Articles