AX4400 v1 vs v1.60, What's the Difference?

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

AX4400 v1 vs v1.60, What's the Difference?

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
AX4400 v1 vs v1.60, What's the Difference?
AX4400 v1 vs v1.60, What's the Difference?
2022-04-23 18:05:09 - last edited 2022-04-24 14:38:03
Model: Archer AX4400  
Hardware Version: V1
Firmware Version:

Hey all, I'm new to the community, but have been using TP-Link routers for a couple years now since Apple discontinued their AirPort line.

 

My question is, I recently purchased an AX400 v1.0 and when I looked at the support site it also lists a v1.60, but I wasn't able to find anything explaining what the differences were between the hardware version.  So far, I've had a very postive experience with hte new router.  It was pretty much plug and play into my existing setup and the network has run extremely smoothly.  Routers are a device, I like to set and forget whenever possible and so far, this one has been just that.

 

Anyway, if someone has information on hte hardware differences.  I would be curious to know.

 

Thanks

  0      
  0      
#1
Options
1 Accepted Solution
Re:AX4400 v1 vs v1.60, What's the Difference?-Solution
2022-04-24 11:13:22 - last edited 2022-04-24 14:38:03

Hello @iFrog,

 

V1.0 is basically the same as V1.6, you can find the note below:

https://www.tp-link.com/us/support/download/archer-ax4400/#Firmware

Normally Vx.0=Vx.6/Vx.8 (eg:V1.0=V1.6/V1.8);   Vx.x0=Vx.x6/Vx.x8 (eg:V1.20=V1.26/V1.28)

 

The basic functions and features are the same on both V1.0 and V1.6, we generally update the package and product label to mark the package or production revision.

 

Nice to Meet You in Our TP-Link Community. Check Out the Latest Posts: Connect TP-Link Archer BE550 to Germany's DS-Lite (Dual Stack Lite) Internet via WAN Archer GE550 - BE9300 Tri-Band Wi-Fi 7 Gaming Router EasyMesh Is Available When Wi-Fi Routers Work in AP Mode as A Controller. Archer BE550 New Software Enhances System Stability and Optimizes MLO Network Stability. If you found a post or response helpful, please click Helpful (arrow pointing upward icon). If you are the author of a topic, remember to mark a helpful reply as the "Recommended Solution" (star icon) so that others can benefit from it.
Recommended Solution
  0  
  0  
#2
Options
2 Reply
Re:AX4400 v1 vs v1.60, What's the Difference?-Solution
2022-04-24 11:13:22 - last edited 2022-04-24 14:38:03

Hello @iFrog,

 

V1.0 is basically the same as V1.6, you can find the note below:

https://www.tp-link.com/us/support/download/archer-ax4400/#Firmware

Normally Vx.0=Vx.6/Vx.8 (eg:V1.0=V1.6/V1.8);   Vx.x0=Vx.x6/Vx.x8 (eg:V1.20=V1.26/V1.28)

 

The basic functions and features are the same on both V1.0 and V1.6, we generally update the package and product label to mark the package or production revision.

 

Nice to Meet You in Our TP-Link Community. Check Out the Latest Posts: Connect TP-Link Archer BE550 to Germany's DS-Lite (Dual Stack Lite) Internet via WAN Archer GE550 - BE9300 Tri-Band Wi-Fi 7 Gaming Router EasyMesh Is Available When Wi-Fi Routers Work in AP Mode as A Controller. Archer BE550 New Software Enhances System Stability and Optimizes MLO Network Stability. If you found a post or response helpful, please click Helpful (arrow pointing upward icon). If you are the author of a topic, remember to mark a helpful reply as the "Recommended Solution" (star icon) so that others can benefit from it.
Recommended Solution
  0  
  0  
#2
Options
Re:AX4400 v1 vs v1.60, What's the Difference?
2022-04-24 14:40:00

  @Kevin_Z Thanks so much.

  3  
  3  
#3
Options

Information

Helpful: 0

Views: 1148

Replies: 2

Related Articles