Home Network Community > All Threads > Wifi extender only using ethernet port
< All Threads

Wifi extender only using ethernet port

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

Wifi extender only using ethernet port

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Wifi extender only using ethernet port
Wifi extender only using ethernet port
2022-11-23 19:20:31
Model: RE315  
Hardware Version:
Firmware Version:

Hi, i want to know how i must configure RE315 to achieve this:

 

I will connect my router with Tp Link RE315 using Wifi 5ghz, then i will connect Tp Link RE315 to my Tv using Ethernet cable.

 

I want to know is if i can do this without RE315 working as a wireless repeater, because i don't need Wifi signal to be repeated at all.

 

Thank you very much.

  0      
 
  0      
 
#1
Options
3 Reply
Re:Wifi extender only using ethernet port
2022-11-24 11:45:44

  @Galiza 

Hi, there is no need for additional settings to achieve the following setup:

main router----<5ghz>---RE315---<cable>TV

Just some tips during the quick setup:

1. only configure 5ghz to the main router, and skip 2.4ghz.

 

Usually, RE315 is able to provide both wireless and wired connections for devices:

main router----<either 2.4ghz or 5ghz or both>---RE315---2.4ghz clients+5ghz clients+1*Ethernet device.

Best regards.

 

 

 

▶Check What's Currently Going on With Deco ▶Deco Starts Supporting Changing Wireless Channels! ▶Deco X50-5G-V1-1.2.0 Supports WireGuard VPN, Hybrid Mesh and More Try to leave a Message if urgent help is required.
  0  
  0  
#2
Options
Re:Wifi extender only using ethernet port
2022-11-25 08:07:46

  @David-TP 

Thank you very much, so it isn´t possible to dissable Wifi 5 repeater function on RE315 when use it

only to receive Wifi signal from Router and transmit it to Tv using Ethernet cable ?, thanks again !

  0  
  0  
#3
Options
Re:Wifi extender only using ethernet port
2022-11-26 09:50:13

I've just received and installed RE315 and it's possible to dissable Wifi 5 repeater if you only want to use RJ45.

Once configuration is finished just disable Wifi extender on 2.4 & 5 Ghz and you`ll be able to connect to internet through ethernet RJ45.

 

@David-TP Thank you!

  2  
  2  
#4
Options

Information

Helpful: 0

Views: 1926

Replies: 3

Related Articles
Wifi extender with ethernet port
2214 0
Can RE315 or other TP-Link Range Extender work with WiFi using LEAP?
416 0
Setting Up Wireless and Ethernet using same Extender
391 0
Extend wifi using ethernet
1154 3
RE220 Extender Mode, Dead Ethernet Port
477 0
Is the Ethernet port on M5 Deco a 1GBS port?
991 0
About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.