deco S4 disconnects to my Roku only on certain channels
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
I am connecting to a Roku device about 12 feet from the main unit. Some channels will only play for about 2 minutes than the wifi connection is lost and the Roku must be re-started to connect again. Some channels play just fine.
I need some help please.
Thanks
Jerry
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
I had this weird problem with one Roku device with two other Roku's working normally. Verified the Roku versions matched and also searched the Roku support site for answers. My next idea was to physically change the problem Roku with one without problems but didn't have to.
I also was having issues with a couple of devices because they were on a different subnet now after turning on the S4's. I needed all of my WiFi devices on the same subnet as before. I had setup the S4's in the default Router mode which created the additional subnet. Changing to Access Point set all back to one subnet and everything works great including the Roku that did not before.
I'm just moving on as the setup is working extremely well and I am more than happy with the S4's.
Thanks,
Jerry
- Copy Link
- Report Inappropriate Content
Hi, welcome to the community.
I googled a little and found the following posts on Roku:
Is your current issue similar to the OP here?
What are the affected channels on your Roku Streaming device?
Wait for your reply.
Best regards.
- Copy Link
- Report Inappropriate Content
I had this weird problem with one Roku device with two other Roku's working normally. Verified the Roku versions matched and also searched the Roku support site for answers. My next idea was to physically change the problem Roku with one without problems but didn't have to.
I also was having issues with a couple of devices because they were on a different subnet now after turning on the S4's. I needed all of my WiFi devices on the same subnet as before. I had setup the S4's in the default Router mode which created the additional subnet. Changing to Access Point set all back to one subnet and everything works great including the Roku that did not before.
I'm just moving on as the setup is working extremely well and I am more than happy with the S4's.
Thanks,
Jerry
- Copy Link
- Report Inappropriate Content
Information
Helpful: 0
Views: 695
Replies: 2
Voters 0
No one has voted for it yet.