Hi,

I've noticed that the Archer AX95 second 5Ghz band, when set to a DFS channel (100 to 112, 132 to 144), it will use that channel and work well for hours to days but eventually switch off of it  to channel 157 (presumably due to radar detection, as it should). The problem is that it seems to never try to return to the DFS channel it was set to after it switches off. It will remain on channel 157 indefinitely while being set to channel 132 in the settings. I can get it to go back on channel 132 by changing the setting to any other channel and then changing it back to 132, so it doesn't seem like there is constant radar activity on that channel to justify never returning.

This seems like a very similar problem to what was reported in this thread for the AX50, where it was fixed with a beta firmware.

I like to use the DFS channel range 132 to 144 as none of my neighbors are using it. I use the 2nd band on these channels as a dedicated band for wireless VR streaming to an Oculus Quest 2 headset, and it works really well with no stuttering or lag. Unfortunately, many nearby wireless networks are on channel 157 when it falls back from using DFS.