Random stubborn Deco XE75 being weird with devices

Random stubborn Deco XE75 being weird with devices

Random stubborn Deco XE75 being weird with devices
Random stubborn Deco XE75 being weird with devices
2 weeks ago - last edited 2 weeks ago
Model: Deco XE75  
Hardware Version:
Firmware Version:

I have 3 Decos.  XE75 is primary with a X20 and X55 as remotes.  I have a reboot schedule weekly.  As of right now, I have 80 clients connected.  A majority are IoT (Wyze cameras, Light Bulbs, Switches, Plugs, etc).  Most of the time things are fine, but randomly, I will have issues with some IoT devices not being able to connect.  Sometimes my TV (Samsung S90C) won't have internet, but the Deco app shows it as a connected device.  Tonight, however, my PC suddenly doesn't have connection.  Deco app shows it as offline.  These things are always resolved by a reboot of the Deco, not the individual decives.   

 

My question is, why does this happen?  I set up the reboot schedule because before, it could be 2-3 weeks before my network goes wonky and my IoT devices end up offline.  But, even with a reboot schedule, things get weird after a day or 2, but not always.  I haven't had issues in months.  Is there anything I can do to mitigate this issue other than setting up daily reboot schedules?? 

 

Things I have tried include using Connection Preference on the IoT devices to keep them on 1 device and leaving the mobile devices to be able to roam.  I use the High Priority setting for important devices like phones and computers.  The only settings I haven't used are the IoT Network and Device Isolation.  I set the Bandwidth information to what I get from my ISP.  QoS is on.  Not using VPN, Static Routes, IPTV, DDNS, Fast Roaming, or NAT Forwarding.

 

Thanks for any help.

  0      
  0      
#1
Options

Information

Helpful: 0

Views: 96

Replies: 0

Related Articles