Home Network Community > All Threads > New Wi-Fi 7 Deco Feature – Channel Selection
< All Threads

New Release New Wi-Fi 7 Deco Feature – Channel Selection

12

New Release New Wi-Fi 7 Deco Feature – Channel Selection

New ReleaseNew Wi-Fi 7 Deco Feature – Channel Selection
New Wi-Fi 7 Deco Feature – Channel Selection
2024-11-20 00:21:01 - last edited a week ago
Tags: #Firmware Update #Wi-Fi 7 #Official #Highlighted Thread
Model: Deco BE85   Deco BE63  
Hardware Version:
Firmware Version:

New Wi-Fi 7 Deco Feature – Channel Selection


We are excited to introduce the Channel Selection feature for Wi-Fi 7 Deco Mesh Systems. This new functionality, accessible through the Deco app, allows users to manually choose the Wi-Fi channel for each frequency band, providing greater control over network performance in high-interference environments. 


The Deco BE85 and Deco BE63 are the first to receive this feature via their latest firmware updates, with more Wi-Fi 7 Deco models slated to receive it in the future.

 

Update: This feature is available via firmware update on the Deco Models listed below. We will routinely update this post as additional models adopt the feature; however, we always recommend checking your Deco's firmware release notes page for the latest information.

 

Deco BE11000 (V2.6)

Deco BE65 Pro (V1 & V1.6)

Deco BE85 (V2 & V2.6)

Deco BE63 (V2.6)

 

Channel Selection Function Overview


Channel Selection lets Deco users select the optimal Wi-Fi channel on the 2.4 GHz and 5 GHz bands. This feature can benefit areas with multiple overlapping networks or interference from other electronic devices. By manually setting the channel, users may experience improved network stability and enhanced Wi-Fi performance.

 

 

To Use the Channel Selection Feature:


1. Open the Deco App


2. Go to Wi-Fi Settings


3. Select 2.4GHz & 5GHz Wireless Network


4. In the Advanced section, adjust the channel and channel width settings.

 

318c3428a5d34360ad43b96c5c6a6bb4

 

 

Benefits of Manual Channel Selection

 

Reduced Interference

Selecting a specific Wi-Fi channel can help avoid overlap with neighboring networks, particularly in densely populated areas.

 

Optimized Performance

By adjusting the channel and channel width, users can find the best configuration to support stable and fast connections.


Enhanced Control

Manual Channel Selection offers advanced users greater flexibility to fine-tune their Deco network for improved reliability.


With the addition of the channel selection function, Deco users with supported models can now take greater control of their wireless environment, potentially enhancing their Wi-Fi experience by reducing interference and optimizing connectivity.

 

Try out the Channel Selection feature and see how small adjustments can make a big difference in your network’s reliability and speed.

 

 

Update Your Deco

 

Use the Deco app and update to the latest firmware to enjoy this new feature, or check out the Deco BE85 and Deco BE63 Firmware Release Pages below for full firmware notes and downloads.


 

Deco BE85 Firmware Page     |     Deco BE63 Firmware Page

 

 

Questions? Comments?

 

Curious about this feature, or want to discuss your experience with it after updating your Deco? We would love to hear your feedback - feel free to leave a reply in this thread.

Check out the Latest: Getting Started with EasyMesh and TP-Link New Tablet Mode for the Tapo App Comparing the Latest Tapo Doorbells
  1      
 
  1      
 
#1
Options
16 Reply
Re:New Wi-Fi 7 Deco Feature – Channel Selection
2024-11-20 17:30:36
@Ryan: Hi, do you think this feature will be rolled out for other models, such as Deco X55 pro. Thanks
  3  
  3  
#2
Options
Re:New Wi-Fi 7 Deco Feature – Channel Selection
2024-11-20 20:31:03

  @Ryan If the main Deco allows manually selecting the channel, would that selection be propagated to the satellite Decos, even if the satellites do not allow that selection (hardware or firmware not offering that capability)?

  3  
  3  
#3
Options
Re:New Wi-Fi 7 Deco Feature – Channel Selection
2024-11-21 14:32:24

  @yves_b 

 

Yes, if the main Deco's firmware supports this feature, and if Channel Selection is implemented by the user, the satellite Deco node(s) will follow the Channel Selection of the main Deco.

Check out the Latest: Getting Started with EasyMesh and TP-Link New Tablet Mode for the Tapo App Comparing the Latest Tapo Doorbells
  2  
  2  
#4
Options
Re:New Wi-Fi 7 Deco Feature – Channel Selection
2024-11-21 15:21:06

  @Ryan Thank you for the information! Have you ever seen that tested in any cases? I remember when I mixed some Deco models, and if one of the Decos hadn’t been updated with certain features, for example, the IoT network, while the main Deco supported that feature, the entire feature would no longer be displayed after adding the model that didn’t support it yet. By the way, do you have any info regarding this channel selection for other model like X55 pro? Thanks 

  0  
  0  
#5
Options
Re:New Wi-Fi 7 Deco Feature – Channel Selection
2024-11-21 15:33:10 - last edited 2024-11-21 15:41:16

  @Espress0-0 

 

Definitely a valid concern, but I'm happy to report that mixing Deco models shouldn't cause any issues with the feature - as long as the main Deco supports it.

 

The IoT network requires all nodes in the network to support the feature because it involves the creation, broadcast, and management of a specialized Wi-Fi network for IoT devices. However, changing the channel is something the Main Decos have always done in all Deco networks - it was just done automatically. This new feature just introduces the ability for users of supported Deco models to take manual control of what was previously done automatically.

 

As for the Deco X55, unfortunately I don't really have any information I can provide on which specific models are next in line to receive the update. That said, I'll be happy to let our Deco development team know about your interest in the feature on the Deco X55.

Check out the Latest: Getting Started with EasyMesh and TP-Link New Tablet Mode for the Tapo App Comparing the Latest Tapo Doorbells
  1  
  1  
#6
Options
Re:New Wi-Fi 7 Deco Feature – Channel Selection
2024-11-21 17:24:19

  @Ryan Thank you, I'll give it a try. Appreciate all your help!

  0  
  0  
#7
Options
Re:New Wi-Fi 7 Deco Feature – Channel Selection
2024-11-22 02:04:23

  @Ryan I have 3 BE85 and 1 BE 63 deco units with BE85 covering the main house and be63 covering my pool house all wired via Ethernet. And I am mixing the decos and I can confirm the feature is available even if you mix decos. 

  3  
  3  
#8
Options
Re:New Wi-Fi 7 Deco Feature – Channel Selection
2024-11-22 16:57:29

  @Ryan  hey hope urndoing awesome question if this is going to be available for BE95 soon?

 

thank u!

  1  
  1  
#9
Options
Re:New Wi-Fi 7 Deco Feature – Channel Selection
2024-11-22 18:05:12

  @jake26 The thing is we were concerned if mixing Deco models without the Channel Selection feature with model with that feature. Both Deco 85 and 63 that you have there both support Channel Selection. They are just too expensive and not needed for my current 1GBPS plan so I may wait till mine supported.

  0  
  0  
#10
Options
Re:New Wi-Fi 7 Deco Feature – Channel Selection
2024-11-24 14:09:57
same question, will XE75 PRO (v2) get this feature? The auto-channel select feature DOES NOT work, it drowns out my zigbee devices yet it claims the network interference is Perfect
  4  
  4  
#11
Options
12

Information

Helpful: 1

Views: 1495

Replies: 16

Tags

Firmware Update Wi-Fi 7 Official Highlighted Thread
Related Articles
Wi-Fi 7: Deco BE95 Now Available
2909 0
Deco BE25 – Dual-Band BE5000 Wi-Fi 7 Mesh
528 0
Deco 1.9.0 Feature Overview: Wi-Fi Access Control, Matter, Local Only Modes (Coming Soon)
12088 2
RE200: WIFI Channel Selection
626 0
Deco BE16000: Get Started with Wi-Fi 7
2727 0
Deco App Beta: Landscape Mode, Biometric Login, and Main Deco Replacement Feature
1632 3
About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.