Forums/
Kasa Smart Switches
2023-09-20 23:18:12
Hey @FrustratedDude, Thanks for the feedback. This behavior is , unfortunately, the case for most all IoT and Smart Devices, not just ours - It often happens as a result of the newer technologies...
1HELPFULS
Forums/
Deco
2023-09-20 23:01:32
@Bridget_WH, The devices should be able to reconnect after the device is completely removed. I would check to make sure that the device is not connected to the network using a different IP address....
0HELPFULS
Forums/
Feature Request
2023-09-20 22:56:28
@xjsimon, I will see what I can do about forwarding the feedback again, as I have not received this request in a while, and the Deco line has been receiving quite the amount of firmware/feature...
0HELPFULS
Forums/
Kasa Smart Switches
2023-09-20 22:42:37
@Mike_1-, All Switches and Outlets will need to have a neutral, line, and ground available to them. It is most likely that you do not have a neutral available in your wiring , as it was not required...
0HELPFULS
Forums/
Deco
2023-09-20 22:34:54
@SOTAham, Technically, you should have minimal issues doing this, but you should expect some sort of hit to your performance as a result. The satellite Decos technically operate as a Client of the...
0HELPFULS
Forums/
Deco
2023-09-20 22:27:35
Hey @cdysthe, Glad you are enjoying the system so far! What you used this feature for is actually well within what it was designed for. The High Priority setting is a part of the Deco's QoS (Quality...
3HELPFULS