Forums/
Kasa Smart Switches
2023-09-11 21:49:41
@TimoGlock, I would honestly consult with an electrician on the setup, as it sounds like it is far from a standard wiring scheme. You may have all the wires present to allow your electrician to...
0HELPFULS
Forums/
Wi-Fi Routers
2023-09-11 21:08:03
@kuf, You should be able to remove the device by disabling OneMesh on the RE interface, or by opening the settings for the mesh/extended network on the Router - from there you should be able to...
0HELPFULS
Forums/
Deco
2023-09-11 21:02:42
@Ingaborg, At the point where you cannot automatically detect the Deco, you may go to your phone settings to connect to the setup network being broadcast by the Deco manually. After you do the...
0HELPFULS
Forums/
Deco
2023-09-11 20:56:47
@HimWho, The IoT Network is a completely separate SSID being broadcast, so you would need to reconfigure the network settings on your Smart Home Device and App to connect to the IoT Network SSID. If...
1HELPFULS
Forums/
Deco
2023-09-11 20:51:46
@carpentersm, I am not sure how those two services function, so it is possible that something is interfering but you can try a few things: 1) After Assigning the Device to the Profile - Forget and...
1HELPFULS
Forums/
Wi-Fi Routers
2023-09-11 20:39:44
@Scoots987, One thing you could first try is setting a priority QoS for your devices and seeing if your upload is any higher. Otherwise, remove any QoS settings you may have configured. I would also...
0HELPFULS