Forums/
Kasa Smart Switches
2023-06-14 16:53:38
@AnsonPai, I would make sure that you did not accidentally configure a smart action, schedule, or away mode for the device; or that the feature was not accidentally enabled with the firmware update....
0HELPFULS
Forums/
Range Extenders
2023-06-14 16:51:13
@tl777111, Any network that is using an RE will require that there be a router on your network, as this will manage your device's connections. The Range Extenders simply forward traffic back to a...
0HELPFULS
Forums/
Kasa Smart Switches
2023-06-14 16:45:21
@Rainbird, You could always use Smart Actions to do this. You may configure the trigger setting to trigger when the smart switch is turned on/off. And then, set the Action to turn on the Smart Plug....
0HELPFULS
Forums/
Deco
2023-06-13 16:41:13
@CashFlowZap, Your X20 can be connected to your modem and router in a few different ways depending on what you are looking for. I would first take a look at our FAQ: The Difference Between Router and...
1HELPFULS
Forums/
Range Extenders
2023-06-13 16:30:56
@Traylor1, Can you clarify what you meant by: "when I try to connect to the new router, it makes a third network" Are you trying to connect the printer to the RE or the Printer? If you are not using...
0HELPFULS
Forums/
Wi-Fi Routers
2023-06-13 16:25:19
@Jeremiah-CHAN, The Process to delete a reservation should be the same as previously, and the steps can be found in this FAQ: Tether - Blocking and Unblocking Devices For the MAC Address changing,...
0HELPFULS