Forums/
Range Extenders
2023-04-17 22:25:04
@JerkyChew, Usually this is a result of the Range Extender replacing the address of the device with the beginning of its own address - You should see that the MAC addresses of connected devices will...
0HELPFULS
Forums/
Deco
2023-04-17 22:11:10
@BriGood, First off, if you are using the Decos in Router Mode, then all of the network traffic needs to pass through one of the deco nodes, which would be replacing the routing functionality of your...
2HELPFULS
Forums/
Range Extenders
2023-04-17 21:58:54
@Bmoon, Have you tried resetting the device to factory defaults and reconfiguring the device to extend your network? If you cannot connect your app to the RE after resetting, I would recommend trying...
0HELPFULS
Forums/
Kasa Cameras
2023-04-17 21:56:13
@KasaUser005, Depending on what router you have, you may try to force the cameras to use the 2.4Ghz band, as your router may be trying to switch them to a 5Ghz connection, which is unsupported. You...
0HELPFULS
Forums/
Kasa Smart Switches
2023-04-17 21:52:57
@sethmiami, Unfortunately, this happens when they are all brought online at once. After a while the setup networks should fall off and require a reset of the device to have the device reappear....
0HELPFULS
Forums/
Deco
2023-04-17 21:48:38
@OrrinC, How is your deco network configured/setup? I know that some odd things can start to happen with static IP addresses when the traffic is passed through a Deco node that is wired to the...
0HELPFULS