I have two Archer C7 V2 routers configured as hardwired access points, connected directly to my cable modem (modem is DNS server). After 24 to 48 hours of operation, the 2.4 GHz band refuses...

Oh! I misunderstood your original instructions. That may be the issue. My gateway setting is located in the section with the DHCP server Settings tab. I assumed the Gateway address didn't matter if...

AP are set to fixed addresses: 192.168.0.201 192.168.0.202 192.168.0.205 Subnet masks are set to: 255.255.255.0

@KevinGA Looking at my Archer C7 access point logs, perhaps I'm not correctly identifying the problem. All access point logs contain the following: 1st day 10:06:16 DHCP INFO DHCPC Send DISCOVER with...

@pcuttle Thanks for the quick reply. The device is a Linux Mint laptop. I think, by default, the MAC address is fixed, but will look into it in more detail. Thanks,

I have 3 Archer C7 routers configured as wireless access points for my home. All devices are wired directly off my cable modem to LAN points. DHCP is disabled on the routers (IP addresses are...