Forums/
Deco
2024-01-22 07:38:34
@Napsterbater From my tests, some devices are using SLAAC, others are using RDDNS, hence setting to SLAAC+RDDNS satisfies all devices. As the Deco app does not show the IPv6 addresses of the devices,...
0HELPFULS
Forums/
Deco
2024-01-21 10:44:59
@DD2 Is your main Deco (in Router mode) connected to the Spectrum modem? I that case, the modem only sees one device, the Deco. If you change the mode of the Deco network from "Router" to AP, then...
0HELPFULS
Forums/
Deco
2024-01-21 10:34:16
@Hcliffe How to configure the main network to broadcast on both bands: - open the Deco app - click on "more" (bottom right) - click on "wi-fi settings" - click on the first line, showing the band(s)...
1HELPFULS
Forums/
Deco
2024-01-21 10:26:51
@HariG Did you chek, in the app, if the "hide network" option was not set in the wifi settings?
1HELPFULS
Forums/
Deco
2024-01-19 10:34:31
@Darthv72 Indeed, when the Deco is setup as a Router, one Ethernet port of the main Deco must be used exclusively to connect to Internet. Other Deco and all local devices must be accessible via the...
1HELPFULS
Forums/
Deco
2024-01-18 07:59:39
@armadefuego Did you connect the main Deco of the secondary mesh on an Ethernet port of a Deco on the main network?
0HELPFULS