Forums/
Deco
2020-05-14 14:14:35
@KoenCrabbe Since the printer is now connected I would enable the 5GHz now. Test the printer afterwards if it still works, and if it does then you will be fine leaving the 2.4GHz and 5GHz on.
0HELPFULS
Forums/
Wi-Fi Routers
2020-05-13 23:19:43
@vtvap3guy Are all devices connected to the same band? Or are the gaming system on the 5G and everything else on the 2.4GHz? I would modify the wireless channel and width to see if you get better...
0HELPFULS
Forums/
Deco
2020-05-13 23:06:34
@Pandemonium No, the bandwidth limit is what you would want to set especially if you feel the speed is reduced. You can manually set it to whatever speeds you have to make sure or slightly higher...
0HELPFULS
Forums/
Adapters
2020-05-13 22:55:42
@hanspeter123 This link may help in hiding the adapter: https://support.microsoft.com/en-us/help/2018577/hide-disable-devices-in-devices-and-printers
0HELPFULS
Forums/
Kasa Smart Bulbs
2020-05-13 22:39:24
@Danzigman With our smart bulbs you do not want to physically switch them off, rather use the app to turn them off. If you physically switch off the bulb then that will effectively power them down so...
0HELPFULS
Forums/
Wi-Fi Routers
2020-05-13 20:25:39
@sinewave Are you able to run an Ethernet cable from your router to the Archer C8? If not, that is fine, I can show how to set it up using the wireless connection.
0HELPFULS