Forums/
Range Extenders
2020-05-13 14:12:59
@citbo Take the extender near the main router, plug it in and default it after it boots up. Use the Tether app to switch it to AP Mode, connect the Ethernet cable, and reboot it. Make sure the SSID...
0HELPFULS
Forums/
Deco
2020-05-12 21:08:07
@KoenCrabbe Given how the printer is only able to connect to 2.4GHz, it might be getting confused since both the 2.4GHz and 5GHz are the same. If you disable the 5GHz, reboot your printer are you...
0HELPFULS
Forums/
Wi-Fi Routers
2020-05-12 20:49:19
@yhbrooklyn I would go with the set up that involves setting a static IP address on both routers that is on the same subnet of the main router, then disabling the DHCP on both Archer routers. You...
0HELPFULS
Forums/
Kasa Smart Switches
2020-05-12 18:42:36
@amb1s1 Here is a FAQ that will show on the lower part how to call scenes in Kasa by using Googles voice commands: https://www.tp-link.com/us/support/faq/1558/
0HELPFULS
Forums/
Wi-Fi Routers
2020-05-12 18:37:53
@Karpiu When you connected the C50 did you adjust the port forwarding rules or kept them the same?
0HELPFULS
Forums/
Adapters
2020-05-12 18:10:29
@hanspeter123 That usually is the setting of the computer. It usually involves right-clicking on your tasks bar then in the settings selecting which icons show up.
0HELPFULS