Forums/
Wi-Fi Routers
2020-01-06 23:11:51
@drewex The term 300 Mbps is derived from applicable specifications and refers to the theoretical maximum raw data transfer rate. This term is used on this product solely to indicate its...
0HELPFULS
Forums/
Deco
2020-01-06 23:05:30
@Stephen_newuser You are correct in that the Deco needs to be setup as a router first, then the mode can change. In your case if you want the Deco in AP mode do this: modem ----- router ----- deco...
0HELPFULS
Forums/
Feature Request
2020-01-06 23:00:04
@MS_in_Kansas Thank you for the feature suggestion. Given the rise of smart devices, knowing that information would be helpful. I will be sure to foward this to our developers for consideration.
3HELPFULS
Forums/
Kasa Smart Switches
2020-01-06 21:48:40
@Adam1234 Here is a figure that should help show why the non smart switch would need to remain powered on. It usually comes down to wiring for needing the manual switch to remain on.
0HELPFULS
Forums/
Kasa Smart Switches
2019-12-18 23:39:39
@Parphyst All feature requests are sent to the devs for consideration to be implemented. We have not heard any news regarding this so as it stands there is nothing being worked on with respect to the...
1HELPFULS
Forums/
Wi-Fi Routers
2019-12-18 00:15:13
@Kitty What is the IP and subnet that you change the router to? What is the IP of one of the computers (IP/Subnet Mask/Gateway)? For one of the computer change the IPV4 information to DHCP and...
0HELPFULS